help with hydraulic plumbing: John Deere Review  -- John Deere Tractors Discussion Forum and Review help with hydraulic plumbing: John Deere Review -- John Deere Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 12-18-2012, 10:25 Post: 185745
johndeer3365



Join Date: Dec 2012
Location: ontario
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 2
 help with hydraulic plumbing

Hello.
I have acquired a John Deere 3365 fairway mower that has been striped of its cutting reels.
It runs great and has lots of hydraulic flow I would imagine.
I want to add a loader and a small backhoe to be for my property.I will need hydraulic remotes to supply a snow blower and a brush cutting to be hooked on the front loader arms as well.
Can anyone help me decipher the hydraulic system on this machine so I know how and where to tap into?
The engine is a 38hp Yanmar, 2 wheel drive with hyrdrostatic hi/low transmission and power steering.
The engine drive shaft powers the tranny and also drives three pumps that are bolted to the front. Two of the pumps are stacked and seem to be self contained with their own reservoir,filter and supply & return lines.(These pumps are 10.9gpm each)They each have their own "out" or pressurized ports. Can I plump these both into one valve to double the flow?
The third pump sits just above them (also driven from the main gearbox) but is part of the main drive system meaning it uses the hydro drives fluid and the pressurized line coming out of the pump goes right back into a manifold that seems to be part of the main transmission.
I know this pump supplies the power steering because one of the lines out of the manifold goes directly to the steering column.
The other port from this manifold is capped off??
Can anyone help tell me what this port would of supplied & how much usable flow I might expect to get from it? It looks to be like a 3/8 ORFS fitting...just like the steering hoses.
I cant imagine the one steering cylinder using too much flow and this third pump looks to be the same size as the two stacked pumps that I know are 10.9gpm each!
And if I can use this capped port, would I just tap the return line back in with the steering return?
I would like to keep the two self contained stacked pumps working together for a total of 21.8gpm auxilliary to run my backhoe and other inpliments.
This means I still need to supply enough flow for the loader arms.
And what on this machine activates these pumps (a levered cluch)or are they always just pressurized and the relief valve lets it feed back to the tank??

Again this machine is a 1993 John Deere 3365 fairway mower.
If anyone knows the workings or can add any advise at all, I would greatly appreciate it.
Thanks.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Thread 185745 Filter by Poster:
johndeer3365 1 |




Most Viewed

+ John Deere 2210 Backhoe Review
+ John Deere vs Kubota Compact Tractors
+ John Deere 790 fuel shut-off solenoid failing???
+ John Deere low viscosity HY GARD
+ John Deere JD 4100 Wiring diagram
+ JD 790 or Kubota L3000DT
+ Should I buy a John Deere 4105???
+ John Deere 4300 turns over but won't start
+ John Deere 455 garden tractor
+ Oil Change for Diesel Tractor

Most Discussion

+ John Deere 4300 scuffing......
+ Possible Solution To The 4000
+ Dealer out to lunch
+ Just got my new JD 4410 - Prob
+ Hello Green, Goodbye Orange
+ Receiver hitch for iMatch
+ 4300 wheel bolt problems
+ 4000 Ten Series 50 hour break
+ Don't buy JD compact tractors.
+ Oil Change for Diesel Tractor

Newest Topics

+ John Deere 4100 gear 3 point not workin
+ 2000 John Deer Gator 4 X2
+ Mini Excavator SY20C - Small Body with Big Power
+ John Deer 1070 starting problem
+ John Deere 990
+ Tractors R Us
+ john deere 4100 with 410 loader hydraulic problem
+ John Deere 2032R Buying advice
+ John Deere 2010 loss of hydraulics
+ L110 John Deer Tractor gas smell







Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines