Go Bottom Go Bottom

hinomoto e224 radiator cap psi

View my Photos
jmw55018
Join Date: Jun 2016
Posts: 6 mn
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-20          195357

Can anyone tell me what psi radiator cap an e224 is supposed to have? My father inlaws tractor currently has a 3 psi cap on it. That seems pretty low pressure to me. Its been warm for him the last couple summers. I replaced the water pump and thermostat last summer and that helped. It runs warm but doesnt quite overheat. However after you shut ot off, it boils out the overflow after a couple minutes. Radiator seemed clean last time i looked at it, but im going to check that out again next time as well. Anyway, correct cap psi would be nice to know. Tractor is 200 miles away from me and next time i go up there i want to have a new radiator cap with me.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hinomoto e224 radiator cap psi

View my Photos
arcwelder
Join Date: Mar 2014
Posts: 111 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-20          195364

On my little Massey, it has a screen in front of the radiator.
I have to pull the screen and wash the dust out of radiator and screen.
Then runs cool until dust builds up again.
You can take a 1/4 to 3/8 copper tube and fit it to a garden hose. May take some head scratching.
Crimp the end and put a 1/16 hole in the side right at the end.
then you can use it to flush out where the air flows. just be gentle. I put a pencil eraser on the end incase it bumps the radiator. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hinomoto e224 radiator cap psi

View my Photos
jmw55018
Join Date: Jun 2016
Posts: 6 mn
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-20          195365

I blew the radiator out pretty good a while back when i had tractor in my shop to replace the bellhousing. Its definitely something i need to checkout again as well. But itnseems to run hot even with the radiator being clean of debris. I do need to get an infrared thermometer and check for cool spots on radiator as well.

The question still stands though, is a 3 psi cap to low? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hinomoto e224 radiator cap psi

View my Photos
kurtn189
Join Date: Apr 2015
Posts: 5 everett washington. usa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-20          195366

I just want to know if anyone can tell me what the knobs do. I cannot read Japanese I have a n189 hinomoto.

email is the best as this web site I cannot find the things I want easily.

ker194 at American on line with the dot com ending ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hinomoto e224 radiator cap psi

View my Photos
DennisCTB
Join Date: Nov 1998
Posts: 2707 NorthWest NJ
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2016-06-20          195367



Anyone that has an answer for Kurt, please post the answer on the site. Kurt will automatically be sent a copy to his email with a link to this page.

Kurt please explain what knobs you are talking about ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hinomoto e224 radiator cap psi

View my Photos
jmw55018
Join Date: Jun 2016
Posts: 6 mn
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-20          195368

I blew the radiator out pretty good a while back when i had tractor in my shop to replace the bellhousing. Its definitely something i need to checkout again as well. But itnseems to run hot even with the radiator being clean of debris. I do need to get an infrared thermometer and check for cool spots on radiator as well.

The question still stands though, is a 3 psi cap to low? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hinomoto e224 radiator cap psi

View my Photos
lsheaffer
Join Date: Jun 1999
Posts: 1082 Northern Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2016-06-22          195379

That is too low. Should be more in the 7-11 psi range. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hinomoto e224 radiator cap psi

View my Photos
jmw55018
Join Date: Jun 2016
Posts: 6 mn
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-23          195380

Quote:
Originally Posted by lsheaffer | view 195379
That is too low. Should be more in the 7-11 psi range. ...


Thank you! I kinda thought it was to low, thats probably a part the issue then. Especially if the cap is getting weak. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hinomoto e224 radiator cap psi

View my Photos
grumpytoo
Join Date: Oct 2013
Posts: 4 Lonoke, Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-23          195381

I have an e322, the same as yours only two wheel drive. Mine would run great (no overheat) doing all kinds of chores EXCEPT bush hogging. The radiator looked clean on top and water seemed to be passing through. Changed cap, thermostat, belt did parts changing until the only thing left was the radiator or block rust. Took radiator off and had rodded. The shop told me they had to rod three times because it was so clogged. My tractor now runs great. Stays at 180 no matter how long I run or what I do with it. The really good part was the radiator rodding only cost me $80.00. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



hinomoto e224 radiator cap psi

View my Photos
jmw55018
Join Date: Jun 2016
Posts: 6 mn
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-23          195382

Quote:
Originally Posted by grumpytoo | view 195381
I have an e322, the same as yours only two wheel drive. Mine would run great (no overheat) doing all kinds of chores EXCEPT bush hogging. The radiator ...


Yeah im gonna check radiator for cool spots next time i look at it. This little tractor is used mostly for brush hogging so.... ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login