Cub Cadet 2086 no crank issue: Cub Cadet  -- Other Tractor Brands Discussion Forum and Review Cub Cadet 2086 no crank issue: Cub Cadet -- Other Tractor Brands Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Cub Cadet Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 11-25-2015, 00:19 Post: 194089
tdawda



Join Date: Nov 2015
Location: South East Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 6

4
Filter by User
 Cub Cadet 2086 no crank issue

I have a Cub 2086 with the Kawasaki 2 cylinder engine, I have a no start condition, no cranking. The battery is new and the safety switches have been checked to be ok. I also replaced the started switch, no crank issue still present. Can anyone please shed some light on this or and a wiring diagram that may fix this?
Thank You in advance for your efforts.
Tom






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 11-25-2015, 06:53 Post: 194091
kthompson



View my Photos

View my Photos  Pics
Join Date: Oct 2005
Location: South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5105

4
Filter by User
 Cub Cadet 2086 no crank issue

Just wondering do the lights work? If they do how do they react when you have them on and try to start the tractor? If they work and dim when you try to start the engine then there is current being sent to the starter system.

Meters to test the electrical used by most people do not test poor connections. The connection can be sufficient for testing by meter but not to supply the load needed for starting. Depending on your leads length you need a helper: test for voltage on the starter itself. If you have good voltage there then suspect starter issue. If not then back up to power into the starter solenoid. Many miss the ground and even the battery cables. It is easy to miss poor connections there. Take the cables off and use wire brush or rough sand paper to clean the connections do not miss the inside of the batter cable clamps.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 11-25-2015, 10:19 Post: 194092
tdawda



Join Date: Nov 2015
Location: South East Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 6

4
Filter by User
 Cub Cadet 2086 no crank issue

Thank You for your reply. The lights do not work, the starter
has engaged once, engine ran until I disengaged the choke, (too soon), just after I replaced the starter switch. I have re-clean the battery connections along with the engine ground and starter connections, but when I turn the key nothing happens, the 20 amp fuse is good. Any other suggestions that you may have??
Thank You in advance for your reply.
Tom






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 11-25-2015, 23:40 Post: 194095
kthompson



View my Photos

View my Photos  Pics
Join Date: Oct 2005
Location: South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5105

4
Filter by User
 Cub Cadet 2086 no crank issue

This can be very dangerous and having a helper is great if so put them on the seat with clutch depressed and be sure transmission and the pto are out of gear.
Take jumper cable and run from the positive battery terminal to the power stud on the starter to see if will not turn over. You will be bypassing most if not ALL the safety switches so please understand the danger.
If your starter solenoid in on the starter you want the post going into the starter. If the starter does not turn over then it has to be: battery *could be bad or drained), poor ground connection, starter is bad or starter is locking to the fly wheel and is under load, or possible starter solenoid depending on if you ran the power to the right stud or not.

If it starts then something you are bypassing is the issue. You now use a 12 or 14 gauge jumper wire to by pass one safetey switch at the time and even the starter switch to find the one not work. Just hope you don't have more than one for is you do then it gets complicated.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 11-26-2015, 23:44 Post: 194103
tdawda



Join Date: Nov 2015
Location: South East Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 6

4
Filter by User
 Cub Cadet 2086 no crank issue

Thank You for your continued help. I did jump the starter and it cranks strong, all connections are clean and bright, so my next step is to check the seat safety switches, (2), and brake safety switch, (1). I will let you know what I discover.
Once again Thank You for your input!






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 11-27-2015, 16:16 Post: 194107
kthompson



View my Photos

View my Photos  Pics
Join Date: Oct 2005
Location: South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5105

4
Filter by User
 Cub Cadet 2086 no crank issue

On one of mine there is a lever that is not properly adjust for the neutral safely switch so when I found it left it alone. A little built in anti theft feature.

So sit on the tractor, hold the key and work one lever at the time that has a safety switch. The clutch pedal, pto, gear shift, range shift. Take them one at the time and really wiggle them. Make not be moving into the full neutral position.

It crank up and run? May not have due to needing power to fuel cut off.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 11-30-2015, 09:43 Post: 194125
tdawda



Join Date: Nov 2015
Location: South East Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 6

4
Filter by User
 Cub Cadet 2086 no crank issue

Up-date to my no start. I disconnected every connection in the starting circuit, and cleaned each one. I now have a running operating tractor. Thank You for your support.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 11-30-2015, 21:50 Post: 194126
kthompson



View my Photos

View my Photos  Pics
Join Date: Oct 2005
Location: South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5105

4
Filter by User
 Cub Cadet 2086 no crank issue

hurray






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Cub Cadet Forum

Thread 194089 Filter by Poster:
kthompson 4 | tdawda 4 |




Most Viewed

+ Cub Cadet yanmar ex3200
+ Cub Cadet 2130 Transmission Trouble
+ Cub Cadet 7274 specifications?
+ Cub Cadet 7205 PTO clutch problem (?)
+ Cub Cadet hydraulic transmission fluid
+ Cub Cadet 2130 mower deck won't engage
+ Cub Cadet 7275
+ New Cadet safety feature is a pain!
+ Cub Cadet 5254 Tractor Review
+ Transmission trouble

Most Discussion

+ Cub Cadet yanmar ex3200
+ Cub Cadet 7360 addiing rear hy
+ Cub Cadet 6284 Tractor Not Get
+ Cub Cadet Model 7235 will not
+ Optional Single Lever Control
+ Cub Cadet 7274 specifications?
+ Hydraulic problem on MMM
+ 7305 - Lack of power
+ Lawn Tractor Suddenly Dies
+ New Cadet safety feature is a

Newest Topics

+ Cub Cadet 5254 4Wd Driveline Clunking Noise
+ Cub Cadet 3185 fuel problem
+ Cub Cadet 3185 fuel problem
+ Replacement harness headlight connectors - CC 7305
+ Hydro 3pt lift problem
+ Front End Loader relief valve squeals when 3 point
+ No fuel to injectors
+ loader control valve parts
+ cub cadet 7235 front axle
+ New to forums and diesel engines having some troub













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines