Go Bottom

Rear hydraulic outlet-settin up hydraulic top link

View my Photos
IvanT25A
Join Date: Sep 2016
Posts: 4 Crawfordville, FL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-09-27          195827


Hello. Newbie here. I have had my 1986 250A for about five years now. I would love to buy/build a front end loader for it when I have time, but that looks to be a ways off. I was thinking in the meantime to build/buy a carry all box that I could dump from the seat using the rear remote hydraulic outlet and a hydraulic top link. I am puzzled as there is only one hydraulic fitting. I would think that there needed to be two...one for power out, the other for power in. Am I missing something? The manual indicates that both hydraulic spools have the same functioning, but the three point lift has two lines going to the lift cylinder.
Also if anyone has any information about adding a front end loader to this machine I'd love it to collect all that I can about the process.
Many thanks!
Kim




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Rear hydraulic outlet-settin up hydraulic top link

View my Photos
cowrider
Join Date: Apr 2012
Posts: 90 new york
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-09-27          195829


One of the 250AS's I have came with only one line going back besides the two for the 3pt hitch. And to top it off it was capped. Guess they were trying to cut costs? I found a line from one in the salvage yard which would be the best place to find one or they ebay. I drained the fluid from the system which was to be motor oil and replaced it with hydraulic fluid. This works just fine and if I hook something up to the tractor I don't cross contaminate the other tractors.

Some of the other Belarus tractors had quick disconnects of a sort on the lines to the lift cylinder so you could lock the 3pt in place and have another set of remotes. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Rear hydraulic outlet-settin up hydraulic top link

View my Photos
IvanT25A
Join Date: Sep 2016
Posts: 4 Crawfordville, FL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-09-28          195832


Thanks, cowrider. Do you know if there is another port on the hydraulic control assembly to accept the second line?

Kim ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Rear hydraulic outlet-settin up hydraulic top link

View my Photos
cowrider
Join Date: Apr 2012
Posts: 90 new york
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-09-29          195835


There is another port to add the line. Not hard to add if you can get one from another tractor because you will need the banjo bolt and copper washers ....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Rear hydraulic outlet-settin up hydraulic top link

View my Photos
cowrider
Join Date: Apr 2012
Posts: 90 new york
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-09-29          195836


....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login