Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for = motormadness

Topic

Noise comes from the engine as well as vibration of the bed and frame.

This is a simple problem to solve but not without a certain amount of expense.

The BOTA is different than others because it is designed as a work vehicle, not a toy.

So...all that metal needs a little dampening.

I am in the process of correcting my 900 and will be happy to post my mods to date.

I do agree that the two guards under the dump bed should be better designed and in my case they were the first.

Below is a copy of the text of a .doc I have developed and am in the process of completing. So no pictures here. Product used is from DYNAMAT.

Bill

Kubota 2008 RTV 900 Noise Abatement Project.
The project is designed to reduce the mechanical noise of the 3 cylinder diesel engine as well as the vibration of sheet metal harmonics on the Kubota.
What I have completed
1. Picture 1 is of the underside of the dump bed and shows the installation of the Xtreme Dynamat material.
2. 2. Picture 2 is of the back side of the seating module and some of the Dynamat can be seen from this angle.

Picture 3 Shows a bit more of the installed Dynamat

The next step will be to install Hoodliner over the Dynamat. I have built an aluminum cover for the underside of the dump bed but this may not be required. The plate is being held in position for the picture with a �cow stick�, plans are to use self tapping screws to mount it to the dump bed cross members before the application of Dyanmat products. The center rectangle is to allow clearance for a hydraulic cylinder for a dump system. This Kubota does not have the lift kit but maybe later I can install one.
3. Picture 4 is a view of what amounts to the engine bay. A problem with this installation will be to add a frame to finish out the engine bay�s mounts so we can install Dynamat in a continuous manner, this to limit noise leaks. Not a big deal but something that needs to be considered if a �KIT� is developed.
This is a picture of the Hoodliner over the Engine bay. Happy to say that it can be used with very little waste, even if it is cut to match the Dynamat material installed now or if it is installed directly to the aluminum plate I made. Yup, I know it is upside down but the picture looks better this way!
Other steps to develop an installation package,
A. Install Dynadeck in the dump bed�s deck. Currently I have a horse stall mat that is recycled tire material. If I had known about Dynamat before I purchased the Horse Stall Mat material I could have saved some money. But nothing was really lost for it proved to me that I was on the right track.
B. Install Dynadeck in the floor board area of the front seat.
C. Install Dynaplate under the floor board area.
D. Install Dynaplate in the front wheel wells.
E. Install some variant of Dynapad under the lift up seat. Currently this area has a bit of a noise leak which I was unable to isolate with the Xtreme Dyanmat due to the design of the plastic molded seat housing.
F. With the addition of a frame to support the planned Dynamat products we will be able to complete an engine/transaxle bay that will reduce the noise from �as built� Kubota design.
I have purchased and installed one pack of 9 sheets of Xtreme Dynamat . With the pictures of the current install complete I will install the Hoodliner, as soon as I decide if adding the aluminum plate to the bottom of the dump bed is worth the effort.

kubota rtv 900
Utility Vehicles UTV/ATV
Replies 14 Post by motormadness