Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

My '84 JD 850 owners manual states a crackcase oil change with filter should be 4.7 quarts. When I fill my 850 with this much oil it only registers about 1/3 the way up on the cross hatch marks on the oil dip stick. So:<br>
<br>
Is 4.7 quarts the correct oil amount, or should I fill it upto the top of the dipstick cross hatch. <br>
<br>
Thanks <br>
<br>
Scott

JD 850 Crank Case Oil Level
Antique Tractors
Replies 3 Post by bodywash

Thanks -- yes I just installed new injectors as a result of the problem - but apparently the old ones were not the problem. Maybe it is the injector pump.

JD 850 Question
John Deere Tractors
Replies 7 Post by bodywash

I posted this in the JD forum but thought I would try here also.<br>
I am trying to replace an injector on my 84' JD 850. The old injector is proving impossible to pull out. I have tried threading a 6in bolt into the top of the injector and using it as a sort of slide hammer with a 5 lb weight. Still no luck. I am getting very frustrated. I would appreciate any and all suggestions. Also, I am not worried about saving the old injector - just need to get it out.<br>
<br>
Thanks Scott <br>
<br>

Hard to Remove Injector
Parts and Repair
Replies 1 Post by bodywash

I am trying to replace an injector on my 84' JD 850. The old injector is proving impossible to pull out. I have tried threading a 6in bolt into the top of the injector and using it as a sort of slide hammer with a 5 lb weight. Still no luck. I am getting very frustrated. I would appreciate any and all suggestions. Also, I am not worried about saving the old injector - just need to get it out.<br>
<br>
Thanks Scott <br>

Hard to Remove Injector
John Deere Tractors
Replies 10 Post by bodywash