Tractorpoint Login

print < Tractorpoint Login

Search for = gunner

Topic

if a starter isn't burned up, it usually can be rebuilt

Starter for Shibaura SD1540B
Shibaura
Replies 4 Post by gunner

Thanks alot I will try that again on the bleed procedure and replace the fuel filter I havent done that yet

jinma agricat 254 y385 wont start
Jinma Farmpro Agracat Nortrac
Replies 4 Post by pjgunner01

Why does the vent on in injector pump spew fuel. I took is apart and can't figure out how it couldn't leak?

injector pump
Belarus
Replies 1 Post by gunner

I replaced the lift pump and I'm still not getting fuel. I'm told the injector pump needs to be timed when its installed. Any idea on where to get the literature to do this or a service shop in the phoenix area?

workhorse tractor fuel injector pump
Other Tractor Brands
Replies 3 Post by mk19gunner

I have an 2005 HPX 4x4 Gas, when I cold start the machine it starts and runs fine for about 3 mintues under normal operations, then it quits. Sometimes chokeing it will get it strated for a moment but then quits again. If I let it sit for a while it will then start and run fine for 3 mintues and die again. Last night I waited until 8pm and the Gator ran fine for a while as if it had no problems.<br>
I have replaced fuel filter and pump in the last week.<br>
What should I try next?

Gator HPX 4x4 Gas
Utility Vehicles UTV/ATV
Replies 2 Post by Y2Kgunner

I bought a 72" First Choice Finishing Mower 2 years ago. It was noisy running from the first day. I kept it well greased (every 4 to 6 Hours) (Book calls for 20 hrs) The rear blade to pulley spindle failed completely and literally came apart in my hands the first time I mowed this year. I ordered one from my dealer (Hoye Parts, Inc) and about a week later it came from Smart Buy in NC. (Cost $350.00) I replaced it and the mower runs as quiet as any mower I've ever used. It mows level and neatly with good power consumption of the NH 1530 which I use to pull it. It's light weight which allows the use of a larger mower with smaller tractors.

Recommendations: IF you have a noisy journal or gear box, get it replaced immediately. If you need parts, expect to pay a premium price since it is made in Italy and parts come high and slow at best. Good Luck.

First Choice Finish Mower
Mowers Field and Finish
Replies 4 Post by gatailgunner

I have a NH 1530 which is hard to get the hood released. Once it releases, it lifts quite easily. Any suggestions?? How do you put air in the rear tires when they have fluid in them? Mine squirts fluid even when the valve is positioned on top according to directions in the manual.

New Holland Model 1530
New Holland Tractors
Replies 4 Post by gatailgunner