Tractorpoint Login

print < Tractorpoint Login

Search for = gene p

Topic

Chris, sounds like we may have some things in common. dI still have my Dad's 1960 JD 630 in the barn but made the switch to Blue. I looked at blue, red, orange and green and tried to keep an open mind. I've known only green from the time that I could walk (abt. 55 yrs. ago). I demo'ed all four and the NH TC40D just felt like a better tractor for several reasons. Actually red and green were fairly close but apparently the paint is more expensive.
Whatever... I think that we (and many others) made a good choice....What a long wait between order date and delivery. Good Luck

Thanks
New Holland Tractors
Replies 4 Post by gene p

I'm really sorry to understand that NH must have no real plan of action for some problems that seem so frequently encountered by their customers. Can't imagine that this will encourage repeat business but with those exceptions I sure do enjoy working with my Boomer.

Dealer help for TC40D
New Holland Tractors
Replies 12 Post by gene p

If the engine is a direct injection engine, it is abnormal for it to be hard to start, even cold. I own a L2250 (about '87 model) that starts at the turn of the key. This engine starts instantly ("with authority" as I've heard it described)and settles to a smooth idle. I'm not diesel mechanic, but understand that if it starts with white smoke there can be injector or compression problems.

800 hours is low for this age, and if accurate there could be fuel contamination, clogged filter/lines, suction lines leaking air, etc. I don't know if you are looking at a dealer or individual, but I would be relatively sure of the repairs needed before I paid full value for it.

Hard Starting on L295DT
Kubota Tractors
Replies 6 Post by gene Purser

As Bird said, You will get many opinions on this subject. I think the fact that most of the newer mowers come with a flexible link connection at the top infers that the height at the front should be set with the lift links on the 3 PH.

I also agree that running the mower higher in the front will double cut the grass. In some cases this could be advantagous, such as mulching tall grass (cutting it twice) for a better look. I personally like to set the mower as level as possible when mowing established grass. The passing of the rear of the mower has another chance to better trim the grass cut by the
blade(s) as they circle at the front of the mower. Cutting rough brush I set the front lower.

Float or set to rotary mow
Mowers Field and Finish
Replies 15 Post by gene Purser

Multi-viscosity oils were explained to me by a respected oil distributor as having pollimers(sp?)added to provide the characteristics of oils at both ends of the viscosity spectrum. The downside of the pollimers is that they are not lubricants, so any of them added to the oil are displacing lubricating oil. His statement was that it is better to stay with a single weight oil if you change to the proper weight as the weather changes. He also said that the wider the viscosity spectrum (ie 10w40 wt), the more pollimers have to be added. His opinion that a 10w30 was better if you use a multi-viscosity oil.

Of course, with the average vehicle owner unlikely to change oil with temperature changes, the advantages of the multi-viscosity oils being near the right viscosity for all seasons to get the oil flowing early to decrease startup wear is considered to outweigh the additional lube qualities of the single weights.

multigrade oil
Parts and Repair
Replies 13 Post by gene Purser