Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

sounds like you paid for a drilled well. If they only went six foot in the rock and set casing and you have a static water level. The casing isnt sitting down all the way on the rock and its acting like a bored well thus the problems when the water table falls. Seen builders raise the casing up off the rock to make well look better than is.

Well Water Problems
Home Improvement
Replies 37 Post by sloancon

You shouldn't need much vapor barrier in crawl. Here in NC we're required to put down poly and have foundation vents. More vents required without poly. It's kinda like the attic not having vapor barrier because of the ventilation requirements in the attic. If crawl space is bad damp you would probably be better off fixing that probelm. Probably need some grading or just run off downspouts away from foundation. To much moisture in crawl will effect framing before it effects the flooring.

Reflectix Insulation
Home Improvement
Replies 12 Post by sloancon

In the process of clearing septic field for new house and this area would be perfect for my blueberries but don't know about eating blueberries grown over septic tank lines?

Blueberries over septic lines
Garden and Landscape
Replies 3 Post by sloancon

Come on Art, a few are outraged, didn't you notice the recent palastinian elections. More than a few have little regard for human life.

Islam is outraged
Everything and Anything
Replies 21 Post by sloancon

I,ve got a 3830 hst, 4wd what size rollover box blade would be best? Thx.

What size box blade
Kubota Tractors
Replies 3 Post by sloancon

I would like to know if you would have posted if your moral/ethical dilema didn't mean lossing your job. You knew your coworkers, that you couldn't talk too were going to loose their jobs,

My job just went offshore
Everything and Anything
Replies 34 Post by sloancon

Sprayed on inulation lot higher here (NC)and less R-value. I'd use bats and make sure to install vapor barrier. T one eleven is about $25 a sheet (3/8) here. Sheetrock awful cheap but dings up easier. You could install metal four foot up (metal about $2.10 running foot by 3'). If we put rebar in the floor we have to put in a grounding rod and ground all the rebar if there's a chance of any live stock in the barn. Hope you put a vapor barrier down before pouring floor if not might want to seal floor good befor finishing.

Finishing the interior - Pole Barn
Barns Pole Barns
Replies 13 Post by sloancon

Bought 2003 3830L and need to know what size tiller would be best. Thanks.<br>

What size tiller
Kubota Tractors
Replies 5 Post by sloancon

I'm looking at a used 3830L Hst,4wd with bucket. Dealer repo with 165 hrs. One year left on waranty asking 15,000.00 is this fair price. Thanks.<br>

input on used 3830
Kubota Tractors
Replies 2 Post by sloancon

Thanks to all the veterans and active duty personel for the way of life we all enjoy. May God bless you and your families.

Today is Veteran s Day
Just For Fun Off Topic
Replies 8 Post by sloancon

Looking for tractor with bucket need input positive and negative on the 3320 with bucket. Thanks

input on 3320 hydro
John Deere Tractors
Replies 3 Post by sloancon

Mostly woods very little bush hogging. Finish mowing sides of roads.

Input on 7532
Cub Cadet
Replies 4 Post by sloancon

In N.C. we are required to have the pier below the frost line in case of heaving. Also have to have 1 inch rigid insulation 2' around the perimeter with a 6 mil vapor barrier. New trated lumber must use galvanized bolts and fasteners only. Also required to have Y bracing on posts
1/3 the length of post down from top on both sides. If you have a transit shoot the tops of the piers and you want have to notch or cut posts from a ladder.

poles in the ground vs concrete footings with anchor
Barns Pole Barns
Replies 26 Post by sloancon

framing contractor in NC. Most wood I-beams have punch outs for wires and plumbing. Any cut outs big enough for duct work or flex have to be engineered by the supplier or an independent engineer in NC. $100.00 for an engineer is a cheap insurance policy.

Cutting holes in I-Joists
Home Improvement
Replies 9 Post by sloancon