Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Had a problem with the oil "idiot light" on my JD 755. The light started to "flicker" very dimly and varies in dimness as you rev through the RPMs. It does light up bright and fully illuminated when cranking and then starts to flicker when running. The flickering stops at high and low RPMs. I changed out the oil and put in a new sending unit. The light still "flickers" dimly. Could this just be a bad ground connection or could there be a serious problem with the oil pump? I have not put a gauge at the sender and measured the pressure yet but I think that I should. <br>
<br>
Does anyone have a suggestion for troubleshooting or an idea of what the oil pressure should be when I do measure it?<br>

Oil sender Idiot Light
John Deere Tractors
Replies 3 Post by flakedog

I would like to tap my hydraulics to use a three point log splitter. I would no think that it would be all that hard to do. If anyone can recommend a way to do this without buying the expensive factory power beyond unit, I would certainly be interested in you input.

JD 755 Power Beyond
John Deere Tractors
Replies 3 Post by flakedog