Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Has anyone used a Jinma 6" with a 3000 Ford tractor? (or similar size tractor). Is there a problem with alignment of the tractor pto to the chipper ie too steep of an angle? Is the tractor pto too high that would make an angle that would damage either unit especially the tractor pto? Any help would be greatly appreciated.<br>
<br>
Cotton

jinma 6 chipper
Operating and Attachments
Replies 6 Post by cotton

Sounds like I have enough power & engine/pto rpm will be ok.
Thanks a lot.

Jinma wood chipper
Operating and Attachments
Replies 6 Post by cotton

I'm considering purchasing a 3point hitch DR wood chipper. Have a 3000 ford tractor (approx. 45 hp). I need some information (advice) on this chipper if possible: durability, length of time used before blade needs sharpening etc. Chipper can be purchased for approx.<br>
$1900. Is this chipper a quality machine? It would not be used excessively but when needed I would want good results.<br>
I would appreciate some help on this if possible.<br>
<br>
thanx,<br>
wg

dr wood chipper
Operating and Attachments
Replies 1 Post by cotton