Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

If your lucky, they are located in the same place as on my bx23. Lift the seat and look at where the wire loom splits into a 'T' and runs toward the turn signal lights. Mine come right out of the bottom. The ground is a male connector and the female is the positive. Check them with a voltmeter before connecting.

BX24 Worklight Connectors
Kubota Tractors
Replies 2 Post by cheezy1963

Sorry guys....I made a few errors in my post. First of all, I used 3 inch OD .25 wall square tubing for my lower rails....not 4 foot :) My bridge is 24 feet long and 46 inches wide. The upper rails are made of 1.5 inch OD .1875 wall square tubing. The cross planks are made up of treated 2x6 wood. I looked for my original specs but couldn't find them so I went down to the pond and measured. I built it about 2 years ago and believe it cost around $1100 to build it.

bridge for Island
Garden and Landscape
Replies 102 Post by cheezy1963

The problem ended up being the main battery cable and the dealer replaced it. I got it back just in time to dig my pond out before the rain. Thanks to all who helped.

bx23 electrical problem
Kubota Tractors
Replies 13 Post by cheezy1963