Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Hello something is wrong with the 4x4 on my 204c it does not go into 4WD.<br>
<br>
I took the plate off in front of the gear shift and as I engage the 4x4 lever I can see something moving down in the casing. The drive shaft moves as the tractor goes forward and reverse, but the front end will not engage. <br>
<br>
As I engage the 4WD lever it seems easier than normal,I still push in the clutch and let it out slowly and as the tractor starts to move is when it used to go into 4x4, but not now, any ideas what to do next? <br>
<br>
Thank you !

Nortrac 204c does not go into 4WD
Jinma Farmpro Agracat Nortrac
Replies 1 Post by cdjordan

huddleston if i saw the right pics u left it looked like you went in through the top under the seat to get to the hydralics far as i can tell i can only get in from the front or back thank you

Nortrac NT204C Tractor 3PH does not lift
Jinma Farmpro Agracat Nortrac
Replies 15 Post by cdjordan

I have a Nortrac nt 204c, I need to check the hydraulic pump pressure, I know where the line joins together above the brake pedals. Is that where I would check it,does it have a bypass to keep a line from bursting? <br>
<br>
Thanks!

Nortrac NT204C hydraulic pressure check
Jinma Farmpro Agracat Nortrac
Replies 1 Post by cdjordan