Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I really think it is the ignition module. My gator would run until it got hot, then die and not start back until the engine has cooled. I replaced the ignition module and no more problems. Get yourself a new ignition module, install it with the factory insulator, and create another insulator out of a thin rubber sheet, kind of like a jar opener, and install it under the facotry insulator right next on th engine case. It will help dissapate the heat from getting the new module.

old gas gator stops when hot
Utility Vehicles UTV/ATV
Replies 7 Post by bluebm3w

Gatoraider. So I took the cover off of the lower brake pedal assembly and found the equalizer and thumb screws. I pushed the pedal and the cables are not being pulled equally. So I went to the calipers and tightened the pad adjustment screws all the way till the pads were touching the disc. Then I went back up front and adjusted the thumb screws to be the same. Then went back to the calipers and loosened the adjustment screws back off the disc. Then when I checked at the pedal the cables were still not pulling equally. Do you think uneven pad where could cause this? Thanks.

AMT 626 quits when hot and will not restart
Utility Vehicles UTV/ATV
Replies 16 Post by bluebm3w