Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Well gents thanks to all for the suggestions! I saturated all the linkage with a lubricant and I can now control PTO from the seat of my tractor. Thanks again!

TC 35D PTO lever locked up
New Holland Tractors
Replies 4 Post by TxFarm

I'm sure I am too late with this but I ran across an answer to your question when I was troubleshooting my problem yesterday. This is verbatim out of my owners manual: The hydraulic manifold block/diverter valve is located on the right-hand side of the tractor below the platform. The manifold block distributes pumpoil to the PTO valve, HPL valve, optional rear remote valves, optional front remote valve, and the transmission/rear axle reservoir.

The diverter valve can be turned with a blade screwdriver. In the 1 o'clock position hydraulic fluid is directed to the HPL valve and rear remotes (optional). When a front remote valve is plumbed to the three ports- (pressure out, pressure return, and sump or tank) the diverter valve must be turned counterclockwise to 11 o'clock position for hydraulic fluid flow to the front remote valve and the to the HPL valve.

Hope you have success with your problem!

Adjusting hydraulic pump flow TC35
New Holland Tractors
Replies 23 Post by TxFarm

Just wanted to say thanks to you guys for the input and suggestions! They were much appreciated

New Holland TC35D Haying equipment
New Holland Tractors
Replies 8 Post by TxFarm