Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Like to hear from any one who has set up a quarter inching<br>
valve set up on earlier models or whether indeed its cost effective.<br>
regards Rob

Interest in any-one who has installed a quarter inching valve
Kubota Tractors
Replies 1 Post by Rob-Fisher

Guys, Thanks Art,Beagle
The ability to fine tune the positioning seems like
an extra good idea.Would that also work on the mower deck.I talked to Kubota Australia and they didn't know If could
be fitted up to the B7500.
regards Rob

What does the Quarter Inching Valve Do on the B7510
Kubota Tractors
Replies 7 Post by Rob-Fisher

Guys I've been away for a few days, I do really appreciate<br>
all your input.<br>
I wasn't sure about the running in issue,(didn't read the book much)or even if it still applies these days, so I settled on 1500 because<br>
the motor didn't seem to be revving its head off at this RPM.(and I'm always ready with a foot on the clutch)to disengage if its ready to stall.which brings me to another point I don't understand:I did't think the hydro<br>
needed a clutch? motor to the drive part of it.<br>
And thats interesting about treating the hydro as the gas pedal Art, because thats exactly what I do.<br>
So the way I see it now is to go to 2.5k RPM and leave it at that.<br>
Thanks for the input on the seat issue guys,I,ve got a very bad back and the hard ride over the hours takes its toll. Regards Bob

mowing 6 acres with a B7500
Kubota Tractors
Replies 16 Post by Rob-Fisher

Art, No worries,wives make very good organizers.<br>
Thanks Tom, Art,you are right about the overhead on<br>
the ROPS, I do crash into a lot of branches,I'm going<br>
to order this kit Monday (If its available Here).<br>
Just finshed 4hours of mowing 6 acres, hard work!<br>
regards Bob

Rear Light Option Kit Would you know Art
Kubota Tractors
Replies 7 Post by Rob-Fisher

Thanks again Art,It would be very nice to see you over
in this part of the world,like your country,it is indeed big.
There is a lot of fascinating outback and tractor country that you would really enjoy.
regards bob

Comment on Ground Clearance with 7500
Kubota Tractors
Replies 5 Post by Rob-Fisher

Thanks TomG, seemed like a good idea for power outages.I've been toying with the idea for a awhile.
From what you are saying standalone generators are the only
way to go.
I think I was remembering many years ago farmers used these
around the farm.
regards Bob

Running a Generator on a 7500
Kubota Tractors
Replies 8 Post by Rob-Fisher

WillieH,thankyou I'm understanding these little points
a whole lot better and will be very aware of the fuel level,once again thanks.
I received the Link support panel from the dealer that fits between the tail lights.I had to remove the taillight lenses and do a bit of pushing and pulling of the fenders,finally got the thing bolted in place,looks a whole lot better from the rear and holds that link up.Got a Few scratches!(also noticed that a rear light can be set up on this panel)
regards Bob

Question Re B7500 and B2410 And thanks to Willie H
Kubota Tractors
Replies 9 Post by Rob-Fisher

I have recently joined the forum, I'm from Geelong Australia, I have a few acres :and have used All your
input and recently purchased a B7500 with 60" MMM Deck
Very happy so far, crashed into a few trees with the ROPS,
stalled the little treasure lots.Still going strong .
regards Bob

Thanks for Forum views
Kubota Tractors
Replies 2 Post by Rob-Fisher