Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Hi I don’t have the intermittent starting issue but I’ve got a starter issue for sure. Battery is good, cables are new I bought a new starter but have since found out the old one works fine. I replaced the clutch in my tractor and when I got it back together and installed the starter, it just spins and the bendix won’t advance. When both starters are hooked up to battery off the tractor they work fine. Only when they are physically mounted to the tractor is when they spin slow. I’ve even isolated the starter (while mounted to the tractor) positive to battery and jumper cables for
Battery - to starter mount bolt, same issue. No matter how I config the electrical, as long as the starter is mounted to the tractor it spins slow and won’t advance the bendix. Hopefully some of y’all may have come across the same issue or something like it. Thanks.

TC33 won t start -- sometimes
New Holland Tractors
Replies 33 Post by N61870

Hi there, for the past few months my TC33 has been increasingly harder to start. I am guessing I need to replace the glow plugs. I have been warming the glow plugs for 30 sec or so and it usually starts right up. However, there has been a grinding or rattling noise and a huge puff of black smoke. Today it woould not start so I gave it another 15-20 sec and it finally reluctantly started however it started making a loud noise as if one of the cylinders is not connected to the exhaust. Its not a constant noise but intermittent. As I increased RPM it became a bit steadier. I went to raise the loader and it would not move (raise, lower, tilt) the 3 point would not move either. Thoughts?<br>

New Holland TC33 Hard Start Engine Noise and no hydraulics
New Holland Tractors
Replies 3 Post by N61870