Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I have a JD 4300 and ran out of fuel the other day due to an inoperative fuel gauge. All I did was refuel and crank it over. It did take quite a few revolutions but it eventually started. Due to the compression, I was concerned that I didn't have the amperage to spin it long enough but it did start. I don't think anything less than an excellent battery would have done it though.

Restart after out of fuel
Parts and Repair
Replies 9 Post by JD4300

Thanks Tom. I'll try loosening the switch to see if there's any adjustment on it before I try glueing an extension on the switch. Also, you guys didn't hear it from me but if you disconnect the switch at the connector and jump the two wires it will permanently resolve the problem. That's what I've done but I am going to repair the switch when I figure out the best way to proceed. . .

Sticky kill switch on 4200 hydro
John Deere Tractors
Replies 9 Post by JD4300