Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Today I changed all the fluids on my 2004 farmpro 2425. ( engine,front axle,transmission and hydraulic fluid )<br>
I used my rotary cutter for maybe 20 min. and noticed the needle on the tachometer was not moving. I did overfill the engine oil by about 1/2 qt,removed the extra oil and am now right at the full line. Does nayone have any ideas what caused the hour meter / tach. to stop working. Is it fuse controled?<br>
<br>
Thanks Gerry<br>

Hour meter tack stopped working
Jinma Farmpro Agracat Nortrac
Replies 2 Post by Gerry1

Hi Greg,

You were right. I adjusted the lift handle linkage on the lowering side and evrything seems to be working fine.

Thanks, Gerry

3 point hitch raise lower handle kickback f pro 2425
Jinma Farmpro Agracat Nortrac
Replies 4 Post by Gerry1

First I would like to thank all for the helpfull feedback regarding my front end weight issue. For now I think I will be okay just adding fluid to the front wheels. Today I ran my 5' bushhog for about 40 min. on my farm pro 2425 .<br>
<br>
The whole time I was running up and down a aprox. 35-40% grade. The temp was consistent at 80 deg. and there was no lack of power while in 4 wheel drive and running the pto.<br>
<br>
The tractor seemed very happy in 3 gear low. One of my pins to the stabizing links fell out and , while I discovered this , I also noticed a fair amount of hydro. fluid had come out of the overflow outlet.<br>
<br>
I am new to this tractor and am not sure why this happened. I would appreciate any feedback regarding a possible cause.<br>
Thanks, Gerry<br>

hydraulic fluid farm pro 2425
Jinma Farmpro Agracat Nortrac
Replies 2 Post by Gerry1

Hi Ron,

How heavy are the weights you sell and what are their cost , including shipping ?

Thanks, Gerry

Front wheel weights farm pro 2425
Jinma Farmpro Agracat Nortrac
Replies 6 Post by Gerry1