hydraulic pump prime or bleed
Bob Jones
Join Date: Posts: 1 |
1999-09-22 8212
I had to remove the return line going to pump, now i have air in it, i tried to prime the pump but it will not pick up the prime, the return line is about 30 "how do i get this line full, or is there another way to prime sys. and bleed the air out of it.PLESE HELP i don;t want to haul it 30 miles to dealer.buckjones@aol.com
Reply to | Quote Reply | Add Photo
hydraulic pump prime or bleed
Randy Eckard
Join Date: Posts: 1 |
1999-09-23 8220
Make sure there is plenty of oil in the transmission! Then try either jacking up the rear of the tractor or,even better, backing up a steep hill. The pump should prime itself. If it is still not picking up the oil, don't keep running the tractor or the pump will sieze up. ....
Reply to | Quote Reply | Add Photo
hydraulic pump prime or bleed
Ron from Conn
Join Date: Posts: 1 |
1999-09-24 8254
Bob. If possible loosen a discharge hose or connection. Let air bleed out of pumps until hydraulic fluid is discharged. The pump is air bound. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This