Go Bottom Go Bottom

Need electrical wiring schematic for Yanmar YN146 amp parts I live

View my Photos
James D. Smith
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

1999-07-22          6191

I need a sechmatic drawing for a Yanmar YN-146. The fromt PTO will not work. There is no battery voltage going to the PTO cluch. Never again will I buy some thing that I cant get parts for. The Dealer told me he could get what ever parts I would need in the future. He just did not bother to tell me they had to come from Japan, and cost a arm and leg to buy them.If any one out there in the good old USA has some information as to where I can buy this drawing and other parts PLEASE send e-mail to me.Thank You:James D. Smith

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need electrical wiring schematic for Yanmar YN146 amp parts I live

View my Photos
lsheaffer
Join Date: Jun 1999
Posts: 1082 Northern Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

1999-07-23          6205

A wire runs from the starter switch to the fr. clutch switch & then to the clutch. If you are not getting voltage to the coil, then you either have a bad switch or a break in the wiring. I've worked on a couple of these & parts are avalable in the US. Contact me at sheaftractor@coiinc.com or 815-284-3226 ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login