Go BottomStuck PTO Clutch
 | BillBass
Join Date: Feb 2002 Posts: 190 North Texas 
|
2001-05-15 28212
My PTO clutch will not disengage on my JD 950. Anyone know if there is a way of getting it unstuck? Or is this a trip to the shop?
Reply to |
Quote Reply |
Add PhotoStuck PTO Clutch
| bud in oh.
Join Date: Posts: 1
|
2001-05-15 28216
Bill,my clutch on my 970 did this also, there was a screen on the right of tranny (bellhousing) by the brakes. There was a sheild on the 970 I had to remove to see this little scren. Just remove the screen and you can see the clutch and preasure plate, take a long screw driver and pop the two apart, I never had to apply much preasure to pop them apart. I'm guessing the 970 and 950 are very simular and have the same screen, if this does not work you may have other problems. Hope this helps, budinohio. ....
Reply to |
Quote Reply |
Add PhotoStuck PTO Clutch
| BillBass
Join Date: Feb 2002 Posts: 190 North Texas
|
2001-05-18 28348
Bud
Thanks for the input. Unfortunately, mine does not have the same opening. There is a small opening with a cover near the back of the bell housing (where it tapers down toward the transmission) but it is too far back to get to the clutch. Looks like a trip to the shop as I no not have the winches, lifts or jacks to break it apart. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This