Go BottomKubota 2910 HST Question
 | Kelly Wright
Join Date: Posts: 1 
|
2000-09-16 19829
I have a Kubota 2910 with about 40 hours on it. I noticed that very ocassionally the reverse pedal seems very stiff and reverse speed is limited.The linkage seems free and doesn't bind. It appears to be internal to the transmission.Is this a defect?
Reply to |
Quote Reply |
Add PhotoKubota 2910 HST Question
| Bird Senter
Join Date: Jun 1999 Posts: 962 
|
2000-09-16 19830
Kelly, I'm not enough of a mechanic to diagnose that problem, but I'd sure be calling the dealer. If there are no obstructions to the linkage and it's free, my shop manual mentions a possibility of a problem with high relief pressure and, if that's it, the dealer should take care of that. ....
Reply to |
Quote Reply |
Add PhotoKubota 2910 HST Question
| Gerald Pritchett
Join Date: Posts: 1
|
2000-09-18 19898
Kelly,
I will bet your problem is the same as I have noticed
on my 2910. My leg pushes the big orange cruise control
knob over just enough to block reverse. The cruise works
OK, But it sure is in the way. Too many trips to the dinner
table maybe part of my problem.
Gerald ....
Reply to |
Quote Reply |
Add PhotoKubota 2910 HST Question
| Tom Kaib
Join Date: Posts: 1
|
2000-11-23 21725
Kelly, I agree with Gerald. I have this problem with my 2910 also and it drove me nuts for awhile. If you lean against the cruise control lever just a little the reverse linkage seems to bind. I have had to develop the habit of reaching down and pulling the cruise lever towards me whenever I back up. I might have had to many trips to the dinner table also. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This