Go Bottom

---

Kubota maintenance

Larry Cole Join Date: Posts: 1

2000-07-01          17601

I have read threads of cleaning the screens when changing trans fluid, if my machine has these can someone tell me where they are located as my loader seems sluggish after changing the fluid and filter. Also does anyone know where the timing marks are located for adjusting the valve clearances, the shop manual explains this but does not indicate if these are on the engine or flywheel or wherever. Thanks

Reply to | Quote Reply | Add Photo

---

Kubota maintenance

Bird Senter Join Date: Jun 1999 Posts: 962

2000-07-01          17605

Larry, the transmission "screens" or "strainers" are where the lines go into the transmission; one on either side. It's a metal line that looks like it has a loop on the end and a large bolt through that loop. When you unscrew and pull that "bolt" out, it'll be the strainer. And you have to drain the transmission first (or you'll drain it in a hurry when you remove one the of the strainers).

I don't know which model you have, but the Workshop Manual for the B2710 says to remove the "timing window cover on the clutch housing" and "Align the "1TC" mark line on the flywheel and center of timing window so that the No. 1 piston comes to the compression or overlap top dead center." ....

Reply to | Quote Reply | Add Photo

---

Kubota maintenance

Larry Cole Join Date: Posts: 1

2000-07-03          17672

Thanks guy I appreciate the info, take care and hope youre having a good holiday ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !