Go Bottom

---

New Holland 914a deck problem

Vincent Ronga Join Date: Posts: 1

2000-05-24          16579

I have a NH33D w/60" NH 914a deck. I caught a downed power line and jamed the center blade. After I freed the blade I noticed a slight clunking sound when the mower is either spinning up or down. Or is running at very low RPM's. I checked the blades and the belt. I'm afraid it might be the gear box or driveline. Once the mower is up to speed it seems fine.Can anyone assist me with this issue.Thanks.

Reply to | Quote Reply | Add Photo

---

New Holland 914a deck problem

RickB. Join Date: Posts: 1

2000-05-24          16607

Recheck the deck belt. I bet there is a thin spot where the drive pulley wore the belt away while the blade was jammed. ....

Reply to | Quote Reply | Add Photo

---

New Holland 914a deck problem

Vincent Ronga Join Date: Posts: 1

2000-05-25          16638

Thanks...The deck is new and it wasn't able to spin at all when the blade jammed. Everytime I engaged to PTO the engin would start to stall. I assume the driveline shear bolt would have broken before any serious damage occured. right?

Thanks though, I'll recheck the belt.

Vincent ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !