ignition problem
Hefwannabe
Join Date: Oct 2008 Posts: 2 oklahoma |
2008-10-21 157426
tractor will not start. Does not seem to be getting 12vdc from ignition switch to solenoid. Cannot find a open fuse. Anyone know if this line is fused? If someone could send me a schematic I would appreciate it. Thanks.
Kioti 3054
Reply to | Quote Reply | Add Photo
ignition problem
greg_g
Join Date: Jan 2004 Posts: 1816 Western Kentucky Pics |
2008-10-21 157434
Probably no fuse, more likely the clutch pedal interlock switch. Look under the left floorboard
//greg// ....
Reply to | Quote Reply | Add Photo
ignition problem
auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto Pics |
2008-10-22 157441
If it's not the safety switch (short it with a jumper to test), go over the starting-circuit wires and connectors. Meanwhile, to start, jump between the battery positive and the solenoid switch terminal.
Let us know if you need more info on the above. ....
Reply to | Quote Reply | Add Photo
ignition problem
aosbill
Join Date: Mar 2004 Posts: 7 Massachusetts |
2008-12-18 158673
I just got done paying my dealer close to $650.00 to fix this. I had the same problem, turn key to any position and completely dead. Turns out it was the wiring harnesses on the right hand side of the tractor. Apparently what happens if you don't use the tractor enough is the pins inside the wiring harnesses on these tractors, gets corroded and then burns right off. My suggestion is to find out which harness/harnesses are bad and replace the wiring harnesses and put some dielectric grease on ALL connectors. It can also be as simple as the ignition switch. An ignition switch costs about $58.00. My tractor is over 5 years old and only has about 130 hours on it. This summer I am going to pull all connectors apart and put dielectric grease on all connections. Hopefully I won't have this problem again. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This