PTO speeds
bill
Join Date: Posts: 1 |
1999-12-12 10953
My tractor has three pto speeds. All the markings are in Japanese which I can't read. Can anyone tell me what the three different rpm settings are? I know one is 540 rpm, but at what engine rpm? Thanks, bill
Reply to | Quote Reply | Add Photo
PTO speeds
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
1999-12-12 10962
It's pretty hard to tell you with out knowing what tractor you're talking about. The lowest range is usually 540 at around 80-90% full throttle. ....
Reply to | Quote Reply | Add Photo
PTO speeds
ken
Join Date: Posts: 1 |
1999-12-13 10974
Borrow a strobe tachometer, or buy one if you must, they use an adhesive disk, that's half white, half black, put the disk on the end of the pto shaft, run the tractor at 80-90% of full speed. Point the strobe at the disk and it will tell you the speed the pto is running at. The speeds you will probably find are 540 rpm, 1000 rpm , and 2000 rpm. I did this with an old 2 cyl. deere to find the throttle settings that gave me 540rpm and the 10% over/under points also. Good luck. Ken ....
Reply to | Quote Reply | Add Photo
PTO speeds
timmyb
Join Date: Posts: 1 |
1999-12-13 10978
Hey, I have a Shibaura 1540 DT. I t has all three speed listed i believe. Have to go home and check. WIll get back to you. ....
Reply to | Quote Reply | Add Photo
PTO speeds
bill
Join Date: Posts: 1 |
1999-12-13 10987
Sorry guys, My tractor is a Shibaura SD1540B. If you know the PTO speeds for this model please inform. bill ....
Reply to | Quote Reply | Add Photo
PTO speeds
Jay
Join Date: Feb 2002 Posts: 43 huletts landing ny |
1999-12-19 11283
Bill,
The PTO speeds for the Shibaura SD1540B are as follows:
559, 724 and 1013 rpm @ 2600 rpm.
This tractor weighs 1716 lbs and has an 844cc 2 cylinder engine.
Jay ....
Reply to | Quote Reply | Add Photo
PTO speeds
bill
Join Date: Posts: 1 |
1999-12-19 11299
Thanks Jay for the info on my Shibaura tractor. How did you come up with these specifications on the SD1540B? I have been unable to locate a manual. I would like to obtain info regarding transmission and hydraulic filters and fluid type required.Thanks,bill ....
Reply to | Quote Reply | Add Photo
PTO speeds
Jay
Join Date: Feb 2002 Posts: 43 huletts landing ny |
1999-12-19 11301
Bill,
You are welcome, I hope this helps you.
I do not want to state the obvious, but for the sake of safety, I will.
The only implements designed to use the 2 higher pto speeds on your tractor are Japanese tillers. Please do not try to use American implements with anything but the 1st speed.
I am a Case IH dealer, and have been importing Japanese tractors for years.
I have the specs on almost all of these tractors. If you need filters, email David at DPEquip@aol.com. He probably can get you a filter for your tractor.
Good luck,
Jay
....
Reply to | Quote Reply | Add Photo
Go Top
Share This