SHIBAURA STIGER SD2243 3PH Lift Problems
cadiealyse
Join Date: Aug 2005 Posts: 3 |
2005-08-25 115438
DOES ANYONE HAVE ANY TYPE OF MANUAL THAT I COULD POSSIBLY GET A COPY OF FOR THE SHIBAURA SD2243. THE TRACTOR NEEDS SOME REPAIR AND I CANNOT GET ANY HELP TO WORK ON IT. NEED HELP. THANKS.
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2005-08-26 115503
I can supply you with the closest US tractor repair manual. Email me at sheaftractor at coiinc.com ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
bigschmitz
Join Date: Nov 2007 Posts: 1 Ohio |
2007-11-07 147946
I have a Shibaura sd2243 that I need a manual for. The 3 pt. hitch just quit working and I have tested the electrical solenoids for lift and drop. So now I am looking for more information about this tractor before I start taking things apart too far.
Any help or advice would be appreciated!
Thanks ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
cadiealyse
Join Date: Aug 2005 Posts: 3 |
2007-11-08 147962
I had the same issue with my hydraulic lift to find out that the filter was clogged. It is an inline magnetic type that had shavings clogging it. Once cleaned and fluid was changed; it works fine. Good luck on the manual; I still haven't found a user's manual; only a parts manual. I understand these are "grey" market tractors that were not supposed to be sold in the US. ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2007-11-08 147967
The US tractors did not use the electric over hydraulics 3 point. I can supply manuals for the closest US model & a parts book, which doesn't have a wiring diagram for the 3 point system. My email is different than in the earlier post. parts at sheaftractor.net ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
slider
Join Date: Jan 2008 Posts: 15 Louisiana |
2008-01-20 150472
I have a 2243, lift works but creeps down. If you think I can help... ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2008-01-23 150603
Most likely cause is bad lift cylinder orings. ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
slider
Join Date: Jan 2008 Posts: 15 Louisiana |
2008-01-25 150701
Thanks lsheaffer, I sent you some mail the other day for parts/user manuals. Thx.
Slider ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
slider
Join Date: Jan 2008 Posts: 15 Louisiana |
2008-02-08 151178
Received manuals, Thanks Sheaffer ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
slider
Join Date: Jan 2008 Posts: 15 Louisiana |
2008-04-05 152772
BigSchnitz, hit me up and talk about lift, I have 2243 and have been all through hydraulics ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
argodav
Join Date: Feb 2010 Posts: 3 missouri |
2010-02-02 168350
hello, i'm new to the site, I just bought a 95 shibaura sd2243 and have no manual, user or parts. Is there any way you could send me a copy? Thanks, Dave ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
argodav
Join Date: Feb 2010 Posts: 3 missouri |
2010-02-07 168455
need copy of shibaura sd 2243 manual please.
argo_dav61@hotmail.com ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
Donmac
Join Date: Jul 2012 Posts: 2 Alba, Texas |
2012-07-11 184237
Quote:
|
I have been frantically searching for a manual as well. Could you possibly email me a copy of it? Would appreciate it ever so much.
Thanks, Don. ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2012-07-11 184239
Email me at parts at sheaftractor.net ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
morris
Join Date: Sep 2015 Posts: 2 maryville tn |
2015-09-24 193775
to stop your three point lift from creeping down on the sd2243, there is a round knob under your seat behind your three shifters. after you have you lift all the way up.turn it all the way to the right off..and your lift will not creep down. turn it back on to use it. frank ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
shovelhead
Join Date: Mar 2017 Posts: 20 Southern Arkansas Pics |
2017-04-24 196563
I know this is an old post, but i would caution on doing that. I among others have CRS most of the time, and this can become costly. Not to mention you could deadhead your hyd. pump ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
ace0101
Join Date: Aug 2018 Posts: 3 37865 |
2018-08-13 197922
I know this is a 2005 post but I gota try to get some info. I have looked for the hydraulic filter and can't find it. Can you tell me exactly where it is??? I also have a smaller Shibaura tractor that wouldn't lift the tiller and I took the filter out and cleaned it and put new fluid in it and it works good. ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
ace0101
Join Date: Aug 2018 Posts: 3 37865 |
2018-08-13 197923
SHIBAURA STIGER SD2243 MANUAL
HELP. I have looked for the hydraulic filter and can't find it. I know it is clogged but I can't find it to clean it. Can you tell me exactly where it is??? I also have a smaller Shibaura tractor that wouldn't lift the tiller and I took the filter out and cleaned it and put new fluid in it and it works good. ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
humble1
Join Date: Feb 2021 Posts: 9 sour lake texas |
2021-07-01 200401
need a manuel or advice on how to fix the hrdraulicks ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
humble1
Join Date: Feb 2021 Posts: 9 sour lake texas |
2021-07-01 200402
mine is in the up postion and want go up or down, any advice is welcomed ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
humble1
Join Date: Feb 2021 Posts: 9 sour lake texas |
2021-07-01 200403
mine is stuck in up position and needing a manual ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
grapemaster1
Join Date: Jul 2021 Posts: 1 The Northeast |
2021-07-21 200442
Quote:
|
Were you able to determine cause? I have the same issue. ....
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2021-07-22 200445
I have manuals ....
Link: japanese tractor parts
 
Reply to | Quote Reply | Add Photo
SHIBAURA STIGER SD2243 3PH Lift Problems
bphogue4
Join Date: Dec 2021 Posts: 4 Austin TX |
2021-12-07 200802
I am needing assistance with my Shibaura SD1803, which has an electronic lift control.
Symptom is the lift won't come up, which came on gradually. I have been through the system, from cleaning the hydro pump filter, to checking that I am getting fluid at the lift housing, to fresh trans/hydraulic fluid, to new seal on the piston, to cleaning the solenoids (2) and control body, to checking continuity and and voltages.
I have got 12-14 VDC and 30 VAC at the control box, which is a water proof unit on the right of the seat that has a 3-position joystick, potentiometer, 3-position switch, and a knob that turns infinitely in either direction.
The solenoids seem to be the type that run on A/C current, as they each have only 1 color on the leads, indicating that they can be connected either way. I have no idea what voltage is appropriate, although I guess it may be near the 30 VAC I am measuring at input. I am measuring very low voltages to those leads with the tractor running. Joystick position doesn't seem to be affecting voltage.
The control box is quite intimidating. A black box inside says Control Unit, Model PWM-02 and the brand IHI Ishikawajima-Harima. The circuit board inside was covered with a white plastic liquid that hardened to protect the components, making tracing the 20 or so wires very difficult. I'm pretty sure my problem lies in that box, but even with a bit of electronic experience, I am at a loss to try and analyze what's going on.
I would love to be able to replace the control box and harness. Otherwise, I would just like to bypass all the draft and position controls and just get the basic lift working with a switch of some kind. But I need to know what the solenoids require so I do not fry a coil. Any ideas? ....
Reply to | Quote Reply | Add Photo
Go Top
Share This