Go Bottom Go Bottom

Ford 1910 Hydraulic oil in engine

View my Photos
hillside
Join Date: Jan 2011
Posts: 2 Woodbridge,Ct.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-01-10          176337

I believe that the shaft seal on my hydraulic pump let go and that is why I'm over filling the crank case and the oil is coming out of the breather tube. I'm not quite sure if the pump un bolts from the front cover on the outside or if I have to remove the cover first. Also what is the best way to drain the whole hydraulic system. I pulled the drain plug out and draied the system that way but I still have a remained or contaminated oil in it(water). I drained the loader system wit removing the line and cylinders also. But the fluid is still milky!

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Ford 1910 Hydraulic oil in engine

View my Photos
bohawg
Join Date: Oct 2009
Posts: 20 west virginia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-08-19          190966

Quote:
Originally Posted by hillside | view 176337
[QUOTE=hillside;176337] I believe that the shaft seal on my hydraulic pump let go and that is why I'm over filling the crank case and the oil is coming out of the breather tu ... [/QUO



Did u ever find why the seal went out ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login