Go Bottom Go Bottom

Hydraulics on GC2300

View my Photos
stickman
Join Date: Nov 2003
Posts: 3 Chillicothe, MO
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2003-11-03          67904

I have had this tractor since April of this year. I also have a loader and mower deck, purchased at the same time.

I have experienced frequent problems with the loader valve, it has been replaced twice. The bucket now will not dump right. It goes half way, then stops, and you have to keep pushing the lever over to dump to get it to dump all the way out.

It got so it would not spin the tires under a heavier load. My local dealer changed the proportion valve, and it is still not right. Is this a common problem with this particular model?

The tractor only has 90 hours on it. Most of which are mowing the yard.


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hydraulics on GC2300

View my Photos
44trxfun
Join Date: Sep 2003
Posts: 110 western NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2003-11-03          67905

Stickman, I have a GC2300 w/ FEL also. I only have about 30 hours on it, but I just finished putting in some drainage on one of my roads and (so far) I haven't experienced what you have with your loader. Hope you can get this resolved; it seems like a pretty nice little tractor. Good luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hydraulics on GC2300

View my Photos
TomG
Join Date: Feb 2002
Posts: 5406 Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2003-11-04          67947

Mine won't be too helpful a comment since I'm saying that there's a possibility what you describe is normal operation for quite a few different tractors--it's still aggravation though.

Loaders that pause half way through a dump usually don't have a fast dump feature. The load expels oil from the loader faster than the pump can deliver it. The load dumps most of its weight and then pauses until the pump catches up. Increasing engine rpm reduces the pause. I'm a gear head myself but I think I recall that some HST tractors just don't spin the wheels in high range. If that's what's going on somebody more familiar with HST's might comment on how common the problem is. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hydraulics on GC2300

View my Photos
jim
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-11-11          100251

mine has 4.2 hours on it and has no such problem.
but you have a mower deck and I do not. sounds like you could have a bad control see if your dealer can swap one off another rig for you to try... ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hydraulics on GC2300

View my Photos
Gentleben
Join Date: Sep 2017
Posts: 9 Houston, tx
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-09-10          197061

Mine just quit and it seems like there is a problem with the hydrauic pump i have 400 hrs on a 2004' am in the process of pulling the pump off myselfa s teh price is about 2 grand to let the tractore folks do it.
Check your suction screen for metal shavings and change your oil filter make sure you engine is reved u pwhne using it , my gc2300 had done the work of 10 illegal immigrants at one time but she is tired and needs some help.. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hydraulics on GC2300

View my Photos
Gentleben
Join Date: Sep 2017
Posts: 9 Houston, tx
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-09-13          197080

gear shaft ....

Picture Link
Massey Ferguson Tractors Hydraulics on GC2300
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login