Go Bottom Go Bottom

Massey Ferguson 1010 PTO slows down on full throttle

View my Photos
jb1985
Join Date: Jan 2023
Posts: 3 georgia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2023-01-07          201436

I have a Massey Ferguson 1010, when I engage the PTO it will engage and after about a minute or so it will begin to slow down almost to a stop no matter what the RPM is. any ideas? please help

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson 1010 PTO slows down on full throttle

View my Photos
jb1985
Join Date: Jan 2023
Posts: 3 georgia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2023-01-10          201440

Still waiting for any ideas on the pto issue, any help is appreciated. Massey Ferguson 1010 pto will engage and slows to almost stopping. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson 1010 PTO slows down on full throttle

View my Photos
watts4500
Join Date: May 2009
Posts: 5 AR
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2023-01-10          201442

Wondering if the PTO clutch is shot ....or needs adjustment ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson 1010 PTO slows down on full throttle

View my Photos
jb1985
Join Date: Jan 2023
Posts: 3 georgia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2023-01-22          201446

Tried finding an adjustment point but no luck. I watched a few videos on how to adjust a pto clutch but the only videos I found were on bigger tractors with a removable plate exposing the adjustment screw. Does mine have one of these adjustment screws in a different location maybe? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson 1010 PTO slows down on full throttle

View my Photos
lsheaffer
Join Date: Jun 1999
Posts: 1082 Northern Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2023-01-24          201451

Is it a gear or hydrostatic drive? ....


Link:   japanese tractor parts

 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson 1010 PTO slows down on full throttle

View my Photos
rickeyc
Join Date: Jul 2016
Posts: 9 Orange Mass
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2023-01-25          201454

Not sure if you got a manual or a computer Zip drive of exploded view of your machine. I can not see it obviously so you would have to find out if it's shuttle drive hydrostatic or gear to gear why this is important is because your PTO chuck that enters casting goes probably on a spline shaft if so it should have a slip joint or a two piece coupling or a round shaft with key way or shear key so if for some reason you catch something inside say a brush hog it has break away points with these keys so it don't damage Main unit. If it has a key way and it's sheared it will turn the shaft but loose speed when throttled up as it will slip by where key would lock it in. I don't believe that 1010 has adjustment for PTO speed if you send me serial number I could look into it possible send you excluded picture of the unit and how it operates to see where your issue is. Sorry for long message. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login