MF 1040 4WD wont Engage
treelandl48
Join Date: Sep 2015 Posts: 4 Tennessee |
2015-09-17 193717
The 4WD on this tractor worked well in the past, but now I feel no gear movement or engaging when I push the lever down. Is there some trick to this?
Reply to | Quote Reply | Add Photo
MF 1040 4WD wont Engage
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2015-09-17 193718
Have no idea what the system to engage your four wheel looks like but should be very simple.
If it has worked fine and you are the only operator you should know if something major failed so probably can feel safe it is minor.
Look at the linkage, if you can have someone work it while you look under the tractor to be sure it is moving and no missing pin or such.
Look for bent linkage.
Lube the linkage.
Be sure no sticks or such have gotten jammed in the linkage binding it.
Look and be sure nothing is wrong with the front axle drive shaft is good and connected on both ends.
Have you gotten on soft dirt with pulling something to be sure the front wheel drive is not engaging?
....
Reply to | Quote Reply | Add Photo
MF 1040 4WD wont Engage
treelandl48
Join Date: Sep 2015 Posts: 4 Tennessee |
2015-09-18 193722
The linkage off the handle goes straight into the side of the gearbox so I cant tell what's happening after that.
I was wondering if there is some trick to it, like going in reverse in a certain gear, etc. ....
Reply to | Quote Reply | Add Photo
MF 1040 4WD wont Engage
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2015-09-19 193744
Have someone work the lever and you watch to see if it rotates the rod for there is a pin or set screw there that could be loose or missing or broken. ....
Reply to | Quote Reply | Add Photo
MF 1040 4WD wont Engage
arcwelder
Join Date: Mar 2014 Posts: 111 Florida |
2015-10-30 193958
Look at the exploded view at agco parts book.
Click on view books next to Guest User.
Search for 1030
Massey Ferguson
1030L (2WD: 02067, 4WD: 41713) TRACTOR 651579
FRONT DRIVE AND CREEPER SHIFT CONTROLS Page 70
....
Reply to | Quote Reply | Add Photo
MF 1040 4WD wont Engage
arcwelder
Join Date: Mar 2014 Posts: 111 Florida |
2015-10-30 193959
Wrong page,
that was for 1030
this is for 1040
Massey Ferguson
1040 TRACTOR 651549
FRONT DRIVE AND CONTROLS (FOUR WHEEL DRIVE) Page 66 ....
Reply to | Quote Reply | Add Photo
MF 1040 4WD wont Engage
Longbow06
Join Date: Oct 2015 Posts: 3 Peyton Colorado |
2015-10-31 193970
Not that this will help fix your rig. At least you don't have my problem. The 4WD in my 1120 doesn't work because it came from the factory with the wrong front drive shaft (3/4 inch too short). Previous owner stripped out the yoke. ....
Reply to | Quote Reply | Add Photo
MF 1040 4WD wont Engage
Longbow06
Join Date: Oct 2015 Posts: 3 Peyton Colorado |
2015-10-31 193971
Not that this will help fix your rig. At least you don't have my problem. The 4WD in my 1120 doesn't work because it came from the factory with the wrong front drive shaft (3/4 inch too short). Previous owner stripped out the yoke. ....
Reply to | Quote Reply | Add Photo
MF 1040 4WD wont Engage
treelandl48
Join Date: Sep 2015 Posts: 4 Tennessee |
2020-03-16 198996
All,
Thanks for the suggestions. Turns out that my front drive shaft had broken. All fixed now, and replaced the clutch. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This