Kubota B7800 Belly Mower cuts uneven
RonoldB
Join Date: May 2023 Posts: 1 |
2023-05-08 201596
I purchased a used be 7800 Kubota tractor with a belly mower .When mowing the middle cuts higher than both sides I did try sharpening the blades but I’m not for sure at what angle the blade should be sharpened out for the best results.
Reply to | Quote Reply | Add Photo
Kubota B7800 Belly Mower cuts uneven
sittow
Join Date: Aug 2012 Posts: 5 LaSalle IL |
2023-05-09 201598
I think it sounds like yoou may need to check the settings on the deck. The deck usually has a decal that tells yoou how to set all of the adjusting points. Make sure the rear guide wheel is set correctly. Also if you just mounted the deck, the front attachment can be a bit finicky to do.
As to blades they really just need to be consistent rather than sharp. If they are too blunt the grass will show split ends when it dries. Also there is a positioning pattern that needs to be followed when installing the blades after sharpening. Do you have the pattern? ....
Reply to | Quote Reply | Add Photo
Kubota B7800 Belly Mower cuts uneven
wyzdumbtogo
Join Date: May 2007 Posts: 3 manitoba |
2023-05-09 201604
I just looked at mine and can see that it would be possible to install one upside down changing the cut height. Maybe check that? ....
Reply to | Quote Reply | Add Photo
Kubota B7800 Belly Mower cuts uneven
doolie
Join Date: May 2006 Posts: 0 Wisconsin |
2023-05-17 201616
Correct Blade positions for Kubot RCK60 Mid mount mower Deck ....
Picture Link
Reply to | Quote Reply | Add Photo
Kubota B7800 Belly Mower cuts uneven
doolie
Join Date: May 2006 Posts: 0 Wisconsin |
2023-05-17 201617
Kubota Mower Deck Blade sharpening instructions. You can see they mostly want you to get rid of a cracked blade, and grind irregular blades to make them even . ....
Picture Link
Reply to | Quote Reply | Add Photo
Kubota B7800 Belly Mower cuts uneven
DennisCTB
Join Date: Nov 1998 Posts: 2709 NorthWest NJ Pics |
2023-05-31 201629
I have the Kubota Mid mount deck and if I let the grass get too tall before cutting I get uneven results due to the wheels bending the grass before the deck cuts the grass. The dual mid gauge wheels also seem to create the high middle symtom you describe. Cutting a second time in a new direction fixes it. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This