Go Bottom Go Bottom

L2250 DT 1986 model

View my Photos
blacksheep
Join Date: Feb 2007
Posts: 34 ohio
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-11-05          185401

I am looking at putting Kasco front blade on a L2250 DT and the hydraulic lines hook up under the seat by the draft knob,but i have a hydraulic block down by the filter on the right side of tractor with 2 plugs and flat head screw on the side with 3 steel lines coming from the back of valve.My question is can I hook into this block instead of going to the back under the seat?? The Kasco blade has 1 cylinder for up/down of the blade and 1 lever to raise it up and down.Thanks

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



L2250 DT 1986 model

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2012-11-06          185407

I believe that is the power beyond block that would be used with a loader! So you couldn't find a better place. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



L2250 DT 1986 model

View my Photos
blacksheep
Join Date: Feb 2007
Posts: 34 ohio
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-11-06          185410

Art, Thanks for your reply,would I just take the 2 pipe plugs out and plumb the 2 hydraulic lines in there? Also could I use quick-disconnect on the block.From what I have read on this is you have to turn the screw one way or the other when this blade is hook up,but would that starve the 3pt arms?Thanks Pat ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



L2250 DT 1986 model

View my Photos
blacksheep
Join Date: Feb 2007
Posts: 34 ohio
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-11-12          185457

Art,I am going to change the filter and fuild on the hydraulics when I put the front blade on it.What should I use? The tractor never had a loader just a belly mower.Thanks ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



L2250 DT 1986 model

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2012-11-16          185490


I've been around filters and oil for a lot of years and I do like the Kubota oils and filters. Some people tell me they run different brands but Kubota oil if you wore to look at their engine oil would be like Shell Rimula and the filters, while Ive see different manufacturers cross reference that wouldn't even screw on much less to say that they are getting the right filtration. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



L2250 DT 1986 model

View my Photos
blacksheep
Join Date: Feb 2007
Posts: 34 ohio
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-11-16          185494

Thanks again Art. I will be at Kubota shop in the morning for UDT fuild and filter ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



L2250 DT 1986 model

View my Photos
charlieK
Join Date: Feb 2004
Posts: 137 kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2012-11-19          185510

SUDT will be better for your tractor than UDT--JMMHO ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login