JD4310 4WD No front wheel engagement
Mvspoppy
Join Date: Mar 2018 Posts: 3 Morganton, Ga. |
2018-03-10 197568
I WAS PULLING MY DISC IN THE GARDEN WITH MY 4310 4WD. E-HYDRO. '04 MODEL. HAD SOME HIGH GRASS AND UNDERGROTH IN FENCE CORNER. PUT MY 420 LODDER BUCKET TO THE GROUND AND DRUG IT OUT. DID THIS FOR A LITTLE BIT. MOVED THE BRUSH ASIDE AND THEN WENT BACK TO DISQING. PULLED DOWN THE HILL. NO PROBLEM WITH THE SLIGHT DOWN HILL MOMENTUM. RASED THE DISQ, TURNED AROUND AND DROPPED THE DISQ. AS I GOT TO THE UPHILL, THE DISQ DROG THE TRACTOR DOWN. THE FRONT WHEELS WERNT PULLING. NO UNUSUAL NOISES, NO GRINDING OR POPPING. JUST NO PULL. THE FINDER SWITCH IS FORWARD, THE LIGHT IS ON. ROCK THE SWITCH, THE LIGHT GOES OUT. I PUT THE BUCKED DOWN AND RAISED THE FRONT END. PUSHED ON FORWARD PETLE. THE REAR TIRES PUSHED FORWARD BUT THE FRONT TIRES DID NOT MOVE. ANY IDEAS, PLEASE. ;-)
GOD BLESS.
Reply to | Quote Reply | Add Photo
JD4310 4WD No front wheel engagement
crunch
Join Date: Jan 2007 Posts: 271 Niagara County, NY Pics |
2018-04-26 197710
Its possible you ripped some wires out in the high grass. That happened to me once and caused me to lose drive to my front wheels. ....
Reply to | Quote Reply | Add Photo
JD4310 4WD No front wheel engagement
Mvspoppy
Join Date: Mar 2018 Posts: 3 Morganton, Ga. |
2018-04-26 197712
Thank you for your reply. We're are those wires located? I have looked briefly when it happened. I did not see anything obvious. ....
Reply to | Quote Reply | Add Photo
JD4310 4WD No front wheel engagement
discopaul
Join Date: May 2018 Posts: 2 MN |
2018-05-16 197746
I havehad same problem since shortly after buying tractor. Check front end pinon gear. mine stripped off. JD did half butt repair. welded it instead off replacing it. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This