Go Bottom Go Bottom

speed drop lock valve

View my Photos
Bakerm
Join Date: Aug 2013
Posts: 2 Vashon, Washington
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-08-14          187849

I just bought a used 160 hours JD 4100. It doesn't look like PTO has ever been used, and speed drop/lock valve won"t turn, and lift arms don"t respond to appropriate operation lever. Any suggestions? (Tractor only as a bucket and to my knowledge never used a rear mower or under body mower.) Thanks, Martin

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



speed drop lock valve

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2013-08-14          187852

If it has not been used in a long time it's likely just stuck from not being turned. The last person who closed the valve mail also over tightened it. If both of those, applyit will be terribly difficult to open the valve.

I would suggest a trick I used before with success. Wrap a rag around the control knob and make several passes around the knob, then take the end of the rag and grip it tightly with a pair of vise grip pliers and use the vice grips as leverage against the stem to turn the knob.

This will grip far tighter than you could by hand.


Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login