![Go Bottom](http://tractorpoint.com/images/pageDown_sml.png)
JD 4210 Wiring Diagram
![]() | jfbecke
Join Date: May 2012 Posts: 3 Tennessee ![]() |
2012-05-05 183461
Cannot get my Mid-Mount mower to run. The PTO clutch or something is not engaging. The light comes on the dash but no shaft output. Could this be an electrical problem?
Reply to |
![Quote Post Reply to Post](https://tractorpoint.com/ctb/images/reply.gif)
![Add Photo](https://tractorpoint.com/ctb/images/photoS.gif)
JD 4210 Wiring Diagram
![]() | jfbecke
Join Date: May 2012 Posts: 3 Tennessee ![]() |
2012-05-05 183462
OK, Could not find a diagram today so I just started tracing the circuit. What I found was the solenoid coil had failed on the MId-mount engagement valve. I will have to order a new one. It has a quick disconnect plug on the wiring harness and the coil just slips on the valve with a retaining nut that holds it in place. I hope this helps someone else in the future. ....
Reply to |
![Quote Post Reply to Post](https://tractorpoint.com/ctb/images/reply.gif)
![Add Photo](https://tractorpoint.com/ctb/images/photoS.gif)
JD 4210 Wiring Diagram
![]() | auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto ![]() ![]() |
2012-05-06 183463
I'm sure it will -- thanks. ....
Reply to |
![Quote Post Reply to Post](https://tractorpoint.com/ctb/images/reply.gif)
![Add Photo](https://tractorpoint.com/ctb/images/photoS.gif)
![Go Top](http://tractorpoint.com/images/pageUp_sml.png)
![Share This](http://tractorpoint.com/images/share_this_sml.png)
Share This