Go Bottom Go Bottom

Cub Cadet 6284 hydraulic questions

View my Photos
Kixxis
Join Date: Feb 2015
Posts: 16 Franklin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-04-09          192519

Hey there I'm back again in search of assistance. Everything is good in the cooling system now, for those who helped before. (Installed an in-line radiator hose heater)

Now it's hydraulic issues... my main questions:
What fluid and filters for a hydro change?
How to accurately measure oil in transmission with dipstick (screw-in and measure or just insert)?
Where to find production date to know what filter(s) (reverse flow or standard)?

Is the PTO clutch hydraulically driven? The other day I got my PTO going so I let it run for a bit with PTO on then went to move the tractor. At that point, it seemed like a power struggle between PTO and the hydrostatic movement going forward. When I let off, the PTO returned to full speed. So I'm thinking the fluid level is low because the FEL is slow as molasses even when it's warm and severely lacking power to lift even small things.

Thank you for the help! It's getting nice out and going to need to MMM soon! (For those who don't know, I recently learned myself, Mid-Mount-Mower ;) )


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Cub Cadet 6284 hydraulic questions

View my Photos
Kixxis
Join Date: Feb 2015
Posts: 16 Franklin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-04-15          192561

Looking like I'm SOL here........... ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login