Go BottomCub Cadet 7205 Glow Plug not hot
 | hormer1
Join Date: May 2012 Posts: 12 United States 
|
2012-09-27 185038
Hi, Latest news on this troublesome machine. I am sure only txjoey is interested. As far as I can tell the starting issues might be glow plug related and not fuel delivery issues. There is no current to the plugs or to the fuse box. All wires in the fuse box are hot except for the heavy black and red and small black and red. Recently I have changed the glow plug relay , glow plug controller and both of the inline fuses, 60 and 50 amp. Still no juice to the glow plugs. Should I replace the ignition next? Could there be a problem with a wiring harness? All fuses are good. Is there any way to heat the plugs from another source? Thanks for any suggestions!
Reply to |
Quote Reply |
Add PhotoCub Cadet 7205 Glow Plug not hot
| TxJoey
Join Date: May 2011 Posts: 29 East texas
|
2012-10-05 185121
Homer check key switch wire to glow plugs my key switch was bad.And have seen wire lose and connectors with corrison at key switch.Good luck. ....
Reply to |
Quote Reply |
Add PhotoCub Cadet 7205 Glow Plug not hot
| hormer1
Join Date: May 2012 Posts: 12 United States
|
2012-12-11 185684
TxJoey, A update on my cc 7205. I think the starting issue was caused by either a bad glow plug controller and or glow plug relay. Changed both with oem parts and , since then, no starting issues. Do not change the relay with an over the counter part, that did not work. This issue had nothing to do with fuel delivery. Just a note, the glow plugs only are active when the weather dictates. Therefore, sometimes, there is no juice at the glow plugs. Initially, I thought this indicated a electrical problem, which was not the case. Hope this information helps others. ....
Reply to |
Quote Reply |
Add PhotoCub Cadet 7205 Glow Plug not hot
| TxJoey
Join Date: May 2011 Posts: 29 East texas
|
2013-01-19 186006
Good news Homer.Iam going to rebuild my starter on mine. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This