Have you discovered this about your BX23
lbrown59
Join Date: Posts: 1 |
2004-10-11 98074
When going up a hill and the engine conks out you go sailing to the bottom when you shift into neutral to restart it.
Really scary!
Has this ever happened to you?
>
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
AV8R
Join Date: Oct 2003 Posts: 882 North Central Wisconsin Pics |
2004-10-11 98077
How did the engine "conk out?"
....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
lbrown59
Join Date: Posts: 1 |
2004-10-11 98088
How did the engine "conk out?"
AV8R
====================
Some times when going forward when I hit the pedal to back up
it will belch a puff or 2 of black smoke and sputter a time or two then resume running fine.
However a couple of times it didn't recover but conked out instead.
....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2004-10-11 98094
What RPM's are you running?
You need to crank that thing up. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
AV8R
Join Date: Oct 2003 Posts: 882 North Central Wisconsin Pics |
2004-10-11 98098
If this is happening, you are running WWAAYY to low throttle setting. Low RPM operation can damage your hydro pump. (Especially on a hill situation) There are many threads on this topic. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2004-10-11 98104
Sometimes it's hard to remember when being used to driving cars and trucks that when you need more power we all push the gas petal down further. When running a hydro you have to do the oposite and not push it down so far so the engine can gain RPM and proceed up the hill. I've often found that it is best to get into a lower range(gear) before getting on a hill. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
Kendews
Join Date: Sep 2003 Posts: 48 New England Pics |
2004-10-11 98112
I've had the engine almost conk out when I bounce or shift position in the seat - even with my seatbelt on. I know this is caused by the safty cutout. I've also had my BX23 suddenly roll off my tilted trailer when I shift into neutral to start it up. The brake seems to be pretty useless. I have to remember to start the engine THEN tip the trailer bed. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
lbrown59
Join Date: Posts: 1 |
2004-10-12 98224
1*I've also had my BX23 suddenly roll off my tilted trailer when I shift into neutral to start it up.
2*The brake seems to be pretty useless.
3*I have to remember to start the engine THEN tip the trailer bed.
Kendews
****************************
1*This is pretty dumb to have to basicaly release the brake in order to start the motor.
2*Why don't they have a foot pedal brake like in a car that you can step on to hold the tractor when you start the motor?
Netural should lock the transmission just like park does in a car.
3*This works ok with a trailer, but you can't tilt a hill.
....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
Chief
Join Date: Jul 2003 Posts: 4297 Southwest MiddleTennessee Pics |
2004-10-12 98228
lbrown59,
The conditions you describe have another name for this and you need to set the rpms and/or conditions so the engine does not stall out.
What you are doing is call lugging the engine and diesel especially do not like to be lugged or loaded down beyond a certain point. They can carry a good bit more load than a comparable gas engine but when loaded to the point of stalling; this can damage the engine and cause unusual and excessive bearing wear and just plain old unneeded wear and tear on the engine.
Try to keep the rpms up in a range that allows the engine to recover easily and not get lugged down to a stall. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
AV8R
Join Date: Oct 2003 Posts: 882 North Central Wisconsin Pics |
2004-10-12 98229
1*This is pretty dumb to have to basicaly release the brake in order to start the motor.
2*Why don't they have a foot pedal brake like in a car that you can step on to hold the tractor when you start the motor?
Netural should lock the transmission just like park does in a car.
3*This works ok with a trailer, but you can't tilt a hill.
There is a pedal right over the treddel pedal which controls the brake. On the left side is the brake-lock for Parking. It is strong enough to hold the tractor in neutral on a hill or tilted trailer. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
cthonestguy
Join Date: Jun 2004 Posts: 267 northeast |
2004-10-12 98231
I have a BX and nobody has hills like I have hills. I take my Kubota places that would make some of you guys cringe and it takes a licking. One thing that you must know is that the brakes aren't all that great when going down a steep hill in 2wd- even worse if you have a loader with stuff in it. When you go down hill or unload from a steep trailer try keeping it in 4x4 and you will see a big difference in braking power. This is a rerply for the braking part of this thread. Open that BX throttle up at least 3/4. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
Kendews
Join Date: Sep 2003 Posts: 48 New England Pics |
2004-10-13 98243
The brake on mine doesn't have much holding power at all, whether its locked down or I'm actively stomping on it. When the tractor is out of neutral however it stays in place quite well. Do you think my brakes might need some work? ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
lbrown59
Join Date: Posts: 1 |
2004-10-14 98334
Open that BX throttle up at least 3/4.
==============================
How do you do that when the manusl says not to run it hard for the first 50 hours? ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
lbrown59
Join Date: Posts: 1 |
2004-10-14 98335
There is a pedal right over the treddel pedal which controls the brake. On the left side is the brake-lock for Parking. It is strong enough to hold the tractor in neutral on a hill or tilted trailer.
=================
Mine don't seem to be.
I have to really watch that I'm not driving around with this brake on
....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
lbrown59
Join Date: Posts: 1 |
2004-10-14 98337
1*Try to keep the rpms up in a range that allows the engine to recover easily and not get lugged down to a stall.
2*Do you think my brakes might need some work?
=========================================
1*Would be nice if bx 23 had a tack ; what range would that be?
2*Don't know,any other opinions?
....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
AV8R
Join Date: Oct 2003 Posts: 882 North Central Wisconsin Pics |
2004-10-14 98344
Open that BX throttle up at least 3/4.
==============================
How do you do that when the manusl says not to run it hard for the first 50 hours?
--throttle position doesn't necessarily mean hard use. Lugging is much "Harder" than reving.
There is a pedal right over the treddel pedal which controls the brake. On the left side is the brake-lock for Parking. It is strong enough to hold the tractor in neutral on a hill or tilted trailer.
=================
Mine don't seem to be. I have to really watch that I'm not driving around with this brake on
--My tractor will easily lock the tires. Also will hold quite nicely on a hill. Weight of 'hoe will probably have an impact on this, but the brake should at the least hold your tractor. If not, some adjustment is probably needed. (these aren't the power brakes from the 'ol Buick though. LOL) Just remember to dis-engage it when you start again. (Been there done that. LOL)
1*Would be nice if bx 23 had a tack ; what range would that be?
--3/4 throttle is a good place to start.
....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2004-10-14 98345
The manual suggests you don't run at full throttle for the first fifty hours.
I took that to mean 90 percent throttle was ok. Just push the throttle all the way forward and pull it back an inch or so and run it there.
There is no tach. That implies to me that the whole thing is not very critical.
The foot brake on my BX felt mushy and didn't seem to be particularly effective too. Good thing it isn't needed much. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
lbrown59
Join Date: Posts: 1 |
2004-10-14 98346
Thank you AV8R and DRankin for your todays post.
Your replys were very helpful to me.
....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
BrendonN
Join Date: May 2004 Posts: 89 Central Kansas |
2004-10-29 99451
I'm surprised that the brake on your BX doesn't hold more securely. I'm not sure of the design of the Kubota, but could there be a leak that is getting oil into the brake and reducing its effectiveness? ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2004-10-29 99466
Actually, the brakes run in an oil bath. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
BrendonN
Join Date: May 2004 Posts: 89 Central Kansas |
2004-10-29 99483
Runs in an oil bath? Hmmm, guess that rules out the "oil on the brake" theory to explain poor holding power. :-) ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
grassgod
Join Date: Apr 2004 Posts: 566 ct Pics |
2004-11-09 100094
So I am gathering that the BX model's have inadequate brakes? Is this on the hydro only? I am not sure I would want to own a tractor with this issue. It's a hazzard waiting to happen! My Kubota brakes are emmensley strong! they will hold the machine tight on a fairly steep hill with a full load of dirt in the bucket. I assume it shouldn't be any other way. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2004-11-09 100097
We've not been told of any problems with the BX brakes that I'm aware of. When we are delivering them they have to stop and hold the unit on our roll backs while we fasten them down. Naturally with a hydro the brakes are not used that much but the next time we get some of our higher houred ones in I'll have to go playing. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2004-11-09 100119
I'm not sure I would call them weak.
The pedal is too tall and that makes it hard to reach and hard to put adequate pressure on it. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
jarndt
Join Date: Dec 2003 Posts: 351 Northern Virginia Pics |
2004-11-10 100134
I would have to agree with that. The brake pedal on BX machines is in an awkward position (not that I have a better suggestion). However, in my experinece it has plenty of holding power. Of course, with a hydro you only need the brake to hold your position on a slope or set the parking brake. The hydro tredal takes care of everything else. ....
Reply to | Quote Reply | Add Photo
Have you discovered this about your BX23
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2004-11-10 100182
The owners manual has the adjustment for the brakes. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This