Rear hydraulic outlet-settin up hydraulic top link
IvanT25A
Join Date: Sep 2016 Posts: 4 Crawfordville, FL |
2016-09-27 195827
Hello. Newbie here. I have had my 1986 250A for about five years now. I would love to buy/build a front end loader for it when I have time, but that looks to be a ways off. I was thinking in the meantime to build/buy a carry all box that I could dump from the seat using the rear remote hydraulic outlet and a hydraulic top link. I am puzzled as there is only one hydraulic fitting. I would think that there needed to be two...one for power out, the other for power in. Am I missing something? The manual indicates that both hydraulic spools have the same functioning, but the three point lift has two lines going to the lift cylinder.
Also if anyone has any information about adding a front end loader to this machine I'd love it to collect all that I can about the process.
Many thanks!
Kim
Reply to | Quote Reply | Add Photo
Rear hydraulic outlet-settin up hydraulic top link
cowrider
Join Date: Apr 2012 Posts: 90 new york |
2016-09-27 195829
One of the 250AS's I have came with only one line going back besides the two for the 3pt hitch. And to top it off it was capped. Guess they were trying to cut costs? I found a line from one in the salvage yard which would be the best place to find one or they ebay. I drained the fluid from the system which was to be motor oil and replaced it with hydraulic fluid. This works just fine and if I hook something up to the tractor I don't cross contaminate the other tractors.
Some of the other Belarus tractors had quick disconnects of a sort on the lines to the lift cylinder so you could lock the 3pt in place and have another set of remotes. ....
Reply to | Quote Reply | Add Photo
Rear hydraulic outlet-settin up hydraulic top link
IvanT25A
Join Date: Sep 2016 Posts: 4 Crawfordville, FL |
2016-09-28 195832
Thanks, cowrider. Do you know if there is another port on the hydraulic control assembly to accept the second line?
Kim ....
Reply to | Quote Reply | Add Photo
Rear hydraulic outlet-settin up hydraulic top link
cowrider
Join Date: Apr 2012 Posts: 90 new york |
2016-09-29 195835
There is another port to add the line. Not hard to add if you can get one from another tractor because you will need the banjo bolt and copper washers ....
Picture Link
Reply to | Quote Reply | Add Photo
Rear hydraulic outlet-settin up hydraulic top link
cowrider
Join Date: Apr 2012 Posts: 90 new york |
2016-09-29 195836
....
Picture Link
Reply to | Quote Reply | Add Photo
Go Top
Share This