Go Bottom Go Bottom

TL100A New Holland - Clutch Spring Question

View my Photos
Prichards
Join Date: Oct 2022
Posts: 1 Murchison, TX
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2022-10-01          201347

While shredding with my TL100A New Holland, clutch feel changed, not a smooth push and some creaking sounds while depressing pedal. Inspected underside linkage (left side, of trans by fuel tank). There’s a coil spring, about 3.5 inches long w/ hooks on both ends, hanging loose on 1 end. Other end is connected to clutch llinkage. Cannot see where the loose end should connect. Can send pic. Any ideas?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



TL100A New Holland - Clutch Spring Question

View my Photos
Prichards
Join Date: Oct 2022
Posts: 1 Murchison, TX
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2022-10-01          201348

Looking up from the ground, loose spring on linkage, left side of trans. Can’t determine where the loose end should connect. ....

Picture Link
Parts and Repair TL100A New Holland - Clutch Spring Question
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



TL100A New Holland - Clutch Spring Question

View my Photos
mrozzie
Join Date: Aug 2004
Posts: 3 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2022-11-21          201394

Hope you figured this out maybe if you have a helper move the pedal you can observe the linkage movement to determine location. Could be welded location sanpped off in the field that can happen, LOL ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login