pwer down on post hole digger
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2006-08-14 133277
I have never seen a power down option installed on a 3 pt post hole digger. Tractor Supply's Blue Book shows a 3 pt post hole digger with a lug on top for a power down cyl and also show it has the option to install an extra weight for down force.
My question, where does the other end of the hyd cyl connect for the power down option?
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2006-08-14 133280
Without seeing what you're looking at I'm only guessing here, but there are only so many ways to do it.
The Rhino PHD's use a lug near the gearbox, another on a longer arm, mounted at the boom pivot point, which stands up vertically and has two arms hanging down a little which catch the arch that mounts to the 2 lower points of the 3pth. By extending the cylinder it forces the angle between the arch and the boom pole to change, this causes a downward force on the auger bit.
IMHO, a hyd. drive and mounting it on the FEL is way better bang for your buck.
Best of luck. ....
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
AnnBrush
Join Date: Mar 2004 Posts: 463 Troy OH Pics |
2006-08-14 133281
Look on pg 21 of this manual, the cylinder connects to parts on the PHD only, the tractor is not involved ....
Link:
Click Here
 
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2006-08-14 133287
"the cylinder connects to parts on the PHD only, the tractor is not involved"
Is that not what I said, or was I confusing in my description?
....
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
AnnBrush
Join Date: Mar 2004 Posts: 463 Troy OH Pics |
2006-08-14 133288
I was just reiterating what you said and refering to what was illustrated in the manual ....
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2006-08-14 133297
Thank you guys. I had to look at picture and read Murf's description to fully understand what is done. Does that make much difference?
Boy if you want cartoons, read the warning decals in the manual. Sad, but they are there because somebody has done that.
Murf, I agree with your thought on the fel. ....
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2006-08-14 133301
It was a "not quite enough caffiene morning, so I wasn't sure I was getting my point across or not.
It is one of those, it's better than nothing, but not by much kind of deals.
The two things that make or break it with a PHD is a) down-pressure, the more the better, and b) reverse, as Ann recently discovered, a few seconds of reverse rotation can save hours of frustration, sweating and cursing.
Best of luck. ....
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2006-08-14 133304
Was really just wondering. I keep seeing it here but have never seen it on one.
Again thank both of you. ....
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2006-08-14 133309
I wonder how much weight would have to be added to match the benefit of the power down cylinder.
Strikes me, I am doing too much wondering. ....
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2006-08-15 133335
Let me put it this way, my neighbour weighs about 250 pounds, he put a big old 6' long railway spud bar through the mounting boss on top a borrowed PHD, then hung from the end trying to help it go down.
It did boo all .....
He then went out and hired one of those Mr. Posthole guys to drill the holes for him. The kid showed up with a BX with a PHD with down-pressure, he took about 5 minutes a hole.
I'm a believer.
Kenneth, if it helps any, call it cogitating instead of wondering, it makes it sound more noble......
Best of luck. ....
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2006-08-15 133339
I like drivers best, second if they aren't an option is a hydraulic drive off a loader boom or on the end of a hoe! ....
Reply to | Quote Reply | Add Photo
pwer down on post hole digger
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2006-08-15 133348
Art,
does the driver work well for shrubs? Just cogitating (boy I hope Murf gave me a good word).
You fellows are all right more ways than one. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This