Go Bottom Go Bottom

P21F Tie-Rods

View my Photos
shovelhead
Join Date: Mar 2017
Posts: 20 Southern Arkansas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-07-27          196901

Looking for replacement of the left tie-rod end, ref.#27. Code# 33480 0380. Also, can i change this over to a P.S. set-up? How much would it cost, if using a good used pump or total front end? I understand i'll need to plumb it and so forth. Thanx

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



P21F Tie-Rods

View my Photos
lsheaffer
Join Date: Jun 1999
Posts: 1082 Northern Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-07-27          196902

I'd have to check with Japan on the tie rod end. There is not a kit specifically for your tractor. . I can supply components(cylinder, sensing valve, & proportioning valve) to use to install one, but it would require some fabrication. These components would be around $800. You would have to source hoses & fabricate a clutch housing mounting bracket & modifications to the steering drag link. ....


Link:   japanesetractorparts

 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login