Go Bottom Go Bottom

Need help for Mitsubishi K3A hard starting

View my Photos
sparetime
Join Date: Mar 2010
Posts: 6 Girardville Pa.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-03-21          169418

I just bought a Bolens Diesel H1502 Hydro with 662 hours on it with a Mitsubishi 3 cylinder in it . It sat for 2 years because it was hard to start . He told me he used starting fluid to start it . Once it is warm it starts right up without either . I replaced the glow plugs , flushed out the fuel tank , replaced fuel supply lines . But that did not fix the hard starting . I think it is dropping the fuel from the system but not sure ... Has anyone had this problem or know how I can fix it let me know ? I would hate to waste the 150 I paid for it with all the 3 point attachments . Thanks , Dean .

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need help for Mitsubishi K3A hard starting

View my Photos
ncwtractor
Join Date: Apr 2010
Posts: 19 Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-04-03          169706

If that tractor sat for 2 years and the previous owner used starting fluid then I think you probably have pistons and/or piston rings damage. (crack pistons or siezed rings)
Check your compression.

Or your Injector nozzle is faulty.(nozzle plunger siezed
causing faulty fuel spray into combustion chamber)

If we can be of further service, please let us know.


NCW Tractor Parts, LLC
....


Link:   

Click Here


 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need help for Mitsubishi K3A hard starting

View my Photos
sparetime
Join Date: Mar 2010
Posts: 6 Girardville Pa.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-04-04          169710

Do you have a piston kit with gaskets and rings to rebuild it if it has low compression ? And can you locate injectors ? My engine is a Mitsubishi K3A . Thanks for the reply . ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need help for Mitsubishi K3A hard starting

View my Photos
ncwtractor
Join Date: Apr 2010
Posts: 19 Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-04-04          169736

Yes sir, we have those parts available. What you are requesting is what we call an Inframe Overhaul Kit. That includes: 1 head gasket, 1 oil pan gasket, 1 intake gasket, 1 exhaust gasket, 2 thermostat gasket(s), 3 sets of piston rings, 3 sets of rod bearings.....339.95.

All items listed above are NEW.

Injector Nozzle Assembly (NEW) is 90.00 each.
Piston (NEW) are 95.00 each.
Piston (Good Used) are 55.00 each.

If you feel as if you do not need the complete Inframe Gasket Kit, please let us know.

If we can be of further assistance, feel free to contact us at (903) 603-0913 or email at ncwtractorparts.net.


NCW Tractor Parts, LLC ....


Link:   

Click Here


 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need help for Mitsubishi K3A hard starting

View my Photos
sparetime
Join Date: Mar 2010
Posts: 6 Girardville Pa.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-04-04          169739

I will be calling soon . I will check compression on it this week if thats OK I will be ordering the injector nozzle assemblys . Thanks , Dean . ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need help for Mitsubishi K3A hard starting

View my Photos
ncwtractor
Join Date: Apr 2010
Posts: 19 Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-04-04          169743

Thanks, Dean. I will be looking forward to your call. If we can be of further assistance, just let us know.




Edited to remove advertising component.


....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login