Go Bottom Go Bottom

Massey Ferguson Skid Steer 711

View my Photos
Samuel Beniih
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2003-12-19          71717

I am looking for any information on on a Massey Ferguson 711 skid steer. I also need a spindle and hub assembly.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson Skid Steer 711

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2003-12-19          71746

Massy to the best of my knowledge never built a skid steer. I can't tell you of the manufacturer by model but can by year. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson Skid Steer 711

View my Photos
Sambo56
Join Date: Dec 2003
Posts: 5 Pt.Pleasant Pa.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2003-12-20          71766

I cannot find a identifacition plate on the Machine ,But I have a Massey Ferguson 811 skid steer parts book. The machine looks identiale except the 811 is Diesle and mine is 4 cyl Wisconsin gas. The machine was made for Ferguson by a company that is out of buisiness. New parts are not available. Am looking for used parts or a lead on parts. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson Skid Steer 711

View my Photos
Jawfish
Join Date: Jun 2006
Posts: 1 Raytown, Missouri
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-06-07          130617

I have a MF 711 with a leaking bucket cylinder, do you know where I can get any replacement seal kits for this cylinder? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson Skid Steer 711

View my Photos
earthwrks
Join Date: Dec 2003
Posts: 3853 Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-06-08          130668

Any good hydraulic seal and gasket supplier should have what you need. I got proices to rebuild 25 year old backhoe cylinders and was told $350 and up each! I decided to take them apart and couldn't believe how simple it was to do it myself, not to mention the low cost. It cost less than $24 for three cylinders! Best thing to do is remove the gland/nut pull the piston rod out, put it in a vise and remove the nut that holds the piston. Take the piston--seals and all--to the seal supplier and they will help you remove them in the proper order, and maybe give you advice on upgrades to the seals etc. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson Skid Steer 711

View my Photos
kevanos
Join Date: Feb 2002
Posts: 43 Indiana
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-02-21          139942

There was a 711 skid-steer, as well as various others. Massey sold the industrial equipment business, at least in part, to Fermec in England, so they may have been built by Fermec. In South America, it became Maxion. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Massey Ferguson Skid Steer 711

View my Photos
112958
Join Date: Dec 2019
Posts: 2 new york
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2019-12-19          198898

I'm looking for the same parts. Did you have any luck finding a supplier?
....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login