massey ferguson te-20 tractor Engine Noise after rebuild
michael62
Join Date: Jan 2012 Posts: 3 potsdam |
2012-01-16 182101
i have a noise in the front of my motor i was told its the fly weight i have new rods crank oil pump ,i done a inline rebuilt job runs great well under load the noise is about gone sitting in one spot in sounds like a tap it but it,s not had the cover off bought all new.
i have never touched the front cover on the motor with my stealth o scope it sounds like its in the cover.
any info on what i am in for. i was told they all sound like that when they are warn ....
Reply to | Quote Reply | Add Photo
massey ferguson te-20 tractor Engine Noise after rebuild
tractorsales
Join Date: Jan 2012 Posts: 2 Kansas City Kansas |
2012-01-30 182219
Replace the governor assembly with the late style ball type. This should have been replace along with the timming gears or atleast check the back-lash. Too much back-lash will destroy the governor and distributor. ....
Reply to | Quote Reply | Add Photo
massey ferguson te-20 tractor Engine Noise after rebuild
shona13
Join Date: Mar 2012 Posts: 32 Western Australia |
2012-06-30 184098
G,day michael 62.
Try adjusting the buffer screw first .
If you look at the timing cover you will see a long screw with a lock nut on carefully undo the lock nut and with the engine running screw the adjuster in two turns using a screwdriver you may notice a change in engine speed, dont adjust more than four turns or you could damage the governor tension blade . if this does not work as suggested replace the timing chain and centrifugal governor assembly the complete kit will cost about 100 dollars.
Happy days
Hutch. ....
Reply to | Quote Reply | Add Photo
massey ferguson te-20 tractor Engine Noise after rebuild
michael62
Join Date: Jan 2012 Posts: 3 potsdam |
2012-06-30 184099
i am going to replace the gov and anything else in the front half... thank you all for your info.:) ....
Reply to | Quote Reply | Add Photo
Go Top
Share This