Go Bottom Go Bottom

john deere 4100 with 410 loader hydraulic problem

View my Photos
markkelley
Join Date: Jun 2016
Posts: 6 georgia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-22          195371

Hello I'm new to this so I don't really know what to say. I have a john deere 4100 with a 410 loader. The loader and power steering work flawlessly but the 3 point hitch will not move. I just bought the tractor and didn't know own much about it and when I tried to hook up to a plow today the are would not pick up. I've don't a complete fluid flush and I have cleaned the filter and magnets and still nothing. And advice or things to check be for I take it to a dealer? Thank you very much.
Mark


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



john deere 4100 with 410 loader hydraulic problem

View my Photos
PaulChristenson
Join Date: Dec 2007
Posts: 83 Vermont
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2016-06-22          195372

Quote:
Originally Posted by markkelley | view 195371
Hello I'm new to this so I don't really know what to say. I have a john deere 4100 with a 410 loader. The loader and power steering work flawlessly bu ...


Check the knob under the seat that controls the 3ph movement rate...it may be locked down ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



john deere 4100 with 410 loader hydraulic problem

View my Photos
markkelley
Join Date: Jun 2016
Posts: 6 georgia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-22          195373

I have checked that and it spins and turns the at the knuckle joint as it should and it's all the way open ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



john deere 4100 with 410 loader hydraulic problem

View my Photos
jtdday
Join Date: Jun 2013
Posts: 25 USA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-22          195374

Hi, I'm not sure on this maybe one of the other readers can set me straight. that maybe a yanmar motor and I think that has two hyd. pumps (front & rear) on the left side of the motor. now you will need to verify this info. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



john deere 4100 with 410 loader hydraulic problem

View my Photos
markkelley
Join Date: Jun 2016
Posts: 6 georgia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-22          195375

Quote:
Originally Posted by jtdday | view 195374
Hi, I'm not sure on this maybe one of the other readers can set me straight. that maybe a yanmar motor and I think that has two hyd. pumps (front & re ...

Yes sir it has 2 pumps and the yanmar motor. And far as I can tell but cracking hoses loose they have good pressure. I loosened the pulls on the outlet port on each side of the pump and had pressure ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



john deere 4100 with 410 loader hydraulic problem

View my Photos
jtdday
Join Date: Jun 2013
Posts: 25 USA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-22          195377

well then, I know this is basic but I would then look at the 3 pt lever linkage to know that it is connected under the platform. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



john deere 4100 with 410 loader hydraulic problem

View my Photos
markkelley
Join Date: Jun 2016
Posts: 6 georgia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-06-22          195378

Quote:
Originally Posted by jtdday | view 195377
well then, I know this is basic but I would then look at the 3 pt lever linkage to know that it is connected under the platform. ...

Yes sir and it pivots as it should. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



john deere 4100 with 410 loader hydraulic problem

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2016-06-27          195394

Do not know this tractor model but there is any valve that you need to switch between the front end loader and the lift?

Also does it have draft and lift levers and are both raised? The lift will or will NOT lift with nothing on it? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login