Go Bottom Go Bottom

Fourth Fifth SCV Valve Assy JD4300

View my Photos
markpee
Join Date: Dec 2006
Posts: 26 Pine Bush, NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2007-02-19          139893

So I have an opportunity to purchase a new SCV Valve assembly to give me a quick-connect on the rear of my 4300. Questions are...has anyone ever added one? Is it easy to do assuming I have the instructions? Since I haven't looked at the kit. is there a new lever to add to control the valve, where does it go?

If you have any experience with this, I would appreciate it.

Mark


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Fourth Fifth SCV Valve Assy JD4300

View my Photos
kwschumm
Join Date: Feb 2003
Posts: 5764 NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2007-02-20          139894

I have 4th and 5th scvs on my 4310 to control top and tilt cylinders. The dealer installed them prior to purchase. They have them set up with a diverter so the loader stick does double duty, switch one way and it controls the loader and the other way for top and tilt. I believe this is the JD recommended way to do it. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login