Go Bottom Go Bottom

jinma 254 hydraulics belching out the ovreflow

View my Photos
freetrapper
Join Date: Jun 2017
Posts: 2 Urbana Mo.
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-06-08          196728

Ok, rebuilt all 4 cylinders on the loader, 3 point lift cylinder and replaced steering power steering cylinder, replaced the screen on pick up tube flushed and refilled system every thing worked fine moved some dirt around one day then mowed for around 4 hours another day left it set for a few days started it up noticed I had a little oil drip at the pump mount so I tightened it up and now the stupid thing burps fluid out the overflow till its dumped around a couple quarts then quits but its low enough by then nothing wants to work with out reving up the engine if you top it off it just burps it back out. Help!

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login